1. The following functions are built in.(1) Auto Light Control (ALC)/Electronic LightControl (ELC)(2) Automatic Gain Control (AGC) +15 dBand Automatic Tracing White Balance(ATW)(3) Camera synchronization mode selec-table between internal (INT), Line-locked(LL) for WV-CP240 and WV-CP244 andMultiplexed Vertical Drive (VD2).FEATURES2. Minimum illumination of 0.6 lx (0.06 foot-can-dle) at F0.75 (equivalent to 2.0 lx (0.2 foot-candle) at F1.4)3. Signal-to-noise ratio of 50 dB(Equivalent to AGC Off)4. Horizontal resolution of 480 lines5. Auto iris lens control selectable betweenvideo signal and DC power supply.1. Do not attempt to disassemble the camera.To prevent electric shock, do not removescrews or covers.There are no user serviceable parts inside.Ask a qualified service person for servicing.2. Handle the camera with care.Do not abuse the camera. Avoid striking,shaking, etc. The camera could be damagedby improper handling or storage.3. Do not expose the camera to rain ormoisture, or try to operate it in wet areas.Turn the power off immediately and ask aqualified service person for servicing.Moisture can damage the camera and alsocreate the danger of electric shock.4. Do not use strong or abrasive detergentswhen cleaning the camera body.Use a dry cloth to clean the camera whendirty.In case the dirt is hard to remove, use a milddetergent and wipe gently. Afterwards, wipeoff the remained part of the detergent in itwith a dry cloth.5. Clean the CCD faceplate with care.Do not clean the CCD with strong or abrasivedetergents. Use lens tissue or a cotton tippedapplicator and ethanol.6. Never face the camera towards the sun.Do not aim the camera at bright objects.PRECAUTIONSBefore attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.N0301-0 V8QA5733AN Printed in JapanN 19Model No. WV-CP240WV-CP242WV-CP244Color CCTV CamerasOperating Instructionscsc(Lens Option)PREFACEPanasonic’s WV-CP240/CP242/CP244 series digi-tal signal processing color CCD cameras intro-duce a new level of high picture quality and highresolution through the use of a 1/3-inch interlinetransfer CCD image sensor having 768 horizontalpixels (picture elements), and digital signal pro-cessing LSI’s. This model offers cutting-edgetechnology for advanced video surveillance.The exclamation point within anequilateral triangle is intended toalert the user to the presence ofimportant operating and mainte-nance (servicing) instructions in theliterature accompanying the appli-ance.The lightning flash with arrowheadsymbol, within an equilateral trian-gle, is intended to alert the user tothe presence of uninsulated "dan-gerous voltage" within the product'senclosure that may be of sufficientmagnitude to constitute a risk ofelectric shock to persons. The serial number of this product may be found onthe bottom of the unit.You should note the serial number of this unit in thespace provided and retain this instruction as a per-manent record of your purchase to aid identificationin the event of theft.Model No.Serial No.SA 1966SA 1965WARNING:To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE. REFER SER-VICING TO QUALIFIED SERVICE PERSONNEL.CAUTIONRISK OF ELECTRICSHOCK DO NOT OPENNOTE: This equipment has been tested and foundto comply with the limits for a Class A digitaldevice, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonableprotection against harmful interference when theequipment is operated in a commercial environ-ment. This equipment generates, uses, and canradiate radio frequency energy and, if not installedand used in accordance with the instruction manu-al, may cause harmful interference to radio com-munications.Operation of this equipment in a residential area islikely to cause harmful interference in which casethe user will be required to correct the interferenceat his own expense.FCC Caution: To assure continued compliance,(example - use only shielded interface cables whenconnecting to computer or peripheral devices). Anychanges or modifications not expressly approvedby the party responsible for compliance could voidthe user’s authority to operate this equipment.For U.S.A