Panasonic WV-CP300 Operating Instructions Manual

Also see for WV-CF354E' WV-CF344E: Operating instructions Installation guide

Panasonic WV-CP300 Operating Instructions Manual Manual pdf 10 page image

10Camera operation setting [CAMERA SETUP]The following settings related to camera actions can be configured on the "CAMERA SETUP"screen displayed from the top screen. Refer to page 5-6 for how to call up the screen.The settings configured on the "CAMERA SETUP" screen will be saved as a scene file.1 Register a scene file [SCENE1/SCENE2]It is possible to register 2 patterns of scene file. When different settings are to be appliedbetween day and night, SCENE1 can be applied in the daytime and SCENE2 at night. Changebetween the scene files can be made by shortcut operation. ( page 27) "SCENE1" is set asthe default setting.Screen when "SCENE1" is selected Screen when "SCENE2" is selected**CAMERA SETUP**SCENE1ALC/ELC ALCSHUTTER OFFAGC ON(HIGH)SENS UP OFFWHITE BAL ATW1DNR HIGHAUTO1VMDRET TOP ENDD&N(IR) OFF**CAMERA SETUP**SCENE2COPY(SCENE1)ALC/ELC ALCSHUTTER OFFAGC ON(HIGH)SENS UP OFFWHITE BAL ATW1DNR HIGHAUTO1VMDRET TOP ENDD&N(IR) OFFStep 1After confirming that "SCENE1" is selected, configure the settings of "ALC/ELC" through"VMD". ( page 11-19)To change the scene files, go to step 2.Step 2Move the cursor to "SCENE1" and use the [RIghT] or [LEfT] button to select "SCENE2".→ The screen changes and displays “SCENE2”.Step 3To configure the settings of "SCENE2" using the settings of "SCENE1", press the [SET] buttonafter moving the cursor to "COPY(SCENE1)".→ The settings of "SCENE1" will be copied to "SCENE2".Step 4Edit the settings to be changed.The number displayed at the right side of the title oneach setting screen indicates a scene file number.Step 5Move the cursor to "SCENE2" and press the [RIghT] or [LEfT]button to select "SCENE1" to resume normal operation.Scene filenumber**ALC CONT**(1)BACK LIGHT COMPOFFABSMASK SET- +LEVEL .I..... 0RET TOP ENDBLC ON