Panasonic WV-CP310/G Installation Manual

Also see for WV-CP300G: Operating instructions Operating instructions

Contents

Panasonic WV-CP310/G Installation Manual Manual pdf 8 page image

8PrecautionsRefer installation work to the dealer.Installation work requires technique andexperiences. Otherwise injury or damage tothis product may result.Be sure to consult the dealer.Do not insert any foreign objects.This could permanetly damage this product.Turn the power off immediately and contactqualified service personnel for service.Do not attempt to disassemble or modifythis product.Failure to observe this may cause fire orelectric shock.Consult the dealer for the repair or inspections.Stop operation immediately whensomething is wrong with this product.When smoke goes up from this product orthe smell of smoke comes from this product,continued use will result in fire, injury, ordamage to the product.Turn the power off immediately and contactqualified service personnel for service.Select an installation area that can supportthe total weight.Selecting an inappropriate installation surfacemay cause the product to fall down or toppleover, resulting in injury.Insta l l ati on wor k shall be star te d af te rsufficient reinforcement.Periodic inspections shall be conducted.Rust on the metal parts or screws may causethe product to fall down resulting in injury oraccidents.Consult the dealer for the inspections.This product shall be installed in avibration-free place.Failure to observe this may cause screws andbolts to be loosened and consequently to fallresulting in injury.Install this product in a location highenough to avoid people and objects frombumping the product.Failure to observe this may cause a dropresulting in injury or accidents.Do not strike or give a strong shock to thisproduct.Failure to observe this may cause injury or fire.Turn the power off when do wiring of thisproduct.Failure to observe this may cause electricshock. A short circuit or wrong wiring maycause fire.Do not use this product in an atmosphereof flammable gases.Failure to observe this may cause injury byexplosion.Avoid installing this product in locationswhere it is subject to damage by salt orcorrosive gas.Otherwise the mounting fixtures will deterio-rate, causing the product to fall down andleading to accidents.Tighten screws and mounting fixtures tothe specified torque.Failure to observe this may cause a dropresulting in injury or accidents.