Panasonic WV-CP310 Operating Instructions Manual

Also see for WV-CP300G: Installation guide Operating instructions

Contents

Panasonic WV-CP310 Operating Instructions Manual Manual pdf 10 page image

10Camera title setting [CAMERA ID]This item specified the camera title. The camera title that indicates the camera location and other information about the camera iscreated with alphanumerics and symbols, and is displayed on the screen. The camera title is named with up to 16 characters.Follow the procedure below to specify the camera title.Step 1Select “ON” for “CAMERA ID”, and then press the [SET] button.→ The “CAMERA ID” screen appears.Important:• When “CAMERA ID” is set to “OFF”, the camera title does not appear even after setting the camera title.Step 2Move the cursor to the target item with use of the [UP], [DOWN], [RIGHT], and [LEFT] buttons, and press the [SET] button to enterthe character.→ The entered characters are displayed in the editing area. entry>• To revise a character, move the arrow (↑) in the editing area to a wrong character with use of the [RIGHT] or [LEFT] button, andenter a correct character.• To enter a blank, move the cursor to “SPACE” and press the [SET] button.• To delete all the entered characters, move the cursor to “RESET” and press the [SET] button.Step 3Move the cursor to “POSI” and press the [SET] button after title entered.→ The display positioning screen appears.Step 4Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to decide the title position and press the [SET] button.→ The title position is specified.FLOOR 1Editing areaTop screen “CAMERA ID” screen Display positioning screenMODEL WV-CP310 SERIESCAMERA ID ONCAMERASYSTEMSPECIALLANGUAGEEND SETUP ENABLE**CAMERA ID**0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ().,'":;&#!?=+-*/%$SPACE POSIRET TOP END RESET................