Panasonic WV-CS954 Operating Instructions Manual

Also see for Super Dynamic III WV-CS950: Brochure & specs Specifications Operating instructions

Contents

Panasonic WV-CS954 Operating Instructions Manual Manual pdf 29 page image

(1) Selecting a Scene FileUse this procedure when you want to apply thesettings of a previously stored scene file when you areconfiguring the settings of a preset position.1. Move the cursor to SCENE FILE, and then tilt it leftand right to select the number of the scene file youwant to select.(2) Configuring Scene File Settings1. Move the cursor to SCENE FILE, and then tilt it leftand right to select the number of the scene filewhose settings you want to configure.2. Press the CAM (SET) button.This will display the scene file setting menu.The following items can be set on the Scene filesettings menu. See camera settings for details oneach setting.• SHUTTER (page 23, 24)• AGC (page 24)• SENS UP (page 24)• WHITE BAL (page 25)• MOTION DET (page 36)● Preset Speed Setting (PRESET SPEED)Set the speed the camera moves to the various presetpositions for the sequence and sort operations (page30, 31).1. Move the cursor to PRESET SPEED, and then tilt thejoystick left or right to change the speed setting.Shifting the setting towards the L side decreases thespeed, while shifting towards the H side increase it.To copy the preset ID of another position numberMove the cursor to COPY, and then press the CAM(SET) button. This displays the preset ID of theposition number preceding the one you arecurrently configuring. Each press of the CAM (SET)button scrolls back to the next sequential positionnumber and displays its preset ID.● Light Control (ALC/MANUAL)See page 22 and 23 for information on the setting method.You can adjust the lens iris setting on the detailedmenu when MANUAL is set.● Auto Focus (AF MODE)1. Move the cursor to AF MODE, and then tilt the joystickleft or right to select an auto-focus function setting.MANUAL S.M.L : Auto focus does not operateafter moving to a preset position.AUTO S.M.L : Auto focus operates aftermoving to a preset position.● Sequence/Sort DWELL Time(DWELL TIME)This section explains how to set the length of time thecamera stops (time it stops rotating) and tapes thescene while in the various preset positions for thesequence and sort operations (page 30, 31).1. Move the cursor to DWELL TIME, and then tilt thejoystick left or right to select a DWELL time setting.Tilting the joystick cycles through the stop timedisplay in the sequence shown below. (unit: sec, min)● Scene File Setting (SCENE FILE)Up to 10 scene files, each of which contains camerasettings for a specific location (scene), can be storedin memory. Scene files are managed using scene filenumbers from 1 through 10, and can be selected whenconfiguring preset position settings.The following procedures explain how to select ascene file and how to configure scene file settings.-29-PRESET NO. 1*POSITION SETPRESET IDALC/MANUALAF MODEDWELL TIMESCENE FILEPRESET SPEEDRET TOP DELONALCMANUAL L10S1••••••••IL H**SCENE FILE 1**SHUTTERAGCSENS UPWHITE BALMOTION DETRET TOPOFFON(MID)OFFATW1OFFPRESET NO. 1*POSITION SETPRESET IDALC/MANUALAF MODEDWELL TIMESCENE FILEPRESET SPEEDRET TOP DELONALCMANUAL L10SOFF••••••••IL HPRESET NO. 1*0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ().,'":;&#!?=+-*/%$SPACECOPY POSI RET RESETDOOR............2S ↔ 3S ↔ 5S ↔ 10S ↔ 30S ↔ 1MIN4MIN ↔ 3MIN ↔ 2MINPRESET NO. 1*POSITION SETPRESET IDALC/MANUALAF MODEDWELL TIMESCENE FILEPRESET SPEEDRET TOP DELONALCMANUAL L10SOFF••••••••IL H