8PrecautionsThe following points as well as the con-tents of "Warning" and "Caution" shall beobserved.Refer installation work to the dealer.Installation work requires technique and experi-ences. Otherwise injury, or damage to thisproduct may result.Be sure to consult the dealer.Do not insert any foreign objects.This could permanetly damage this product.Turn the power off immediately and contactqualified service personnel for service.Do not attempt to disassemble or modifythis product.Failure to observe this may cause fire or electricshock.Consult the dealer for the repair or inspections.Stop operation immediately when some-thing is wrong with this product.When smoke goes up from this product or thesmell of smoke comes from this product, con-tinued use will result in fire, injury, or damage tothe product.Turn the power off immediately and contactqualified service personnel for service.Select an installation area that can sup-port the total weight.Selecting an inappropriate installation surfacemay cause the product to fall down or toppleover, resulting in injury.Installation work shall be started after sufficientreinforcement.Periodic inspections shall be conducted.Rust on the metal parts or screws may causethe product to fall down resulting in injury oraccidents.Consult the dealer for the inspections.This product shall be installed in a vibra-tion-free place.Failure to observe this may cause screws andbolts to be loosened and consequently to fallresulting in injury.Install this product high enough to ensurethat people don't hit their heads.Failure to observe this may cause a drop result-ing in injury or accidents.Do not strike or give a strong shock to thisproduct.Failure to observe this may cause injury or fire.Turn the power off when do wiring of thisproduct.Failure to observe this may cause electricshock. A short circuit or wrong wiring maycause fire.Do not use this product in an atmosphereof flammable gases.Failure to observe this may cause injury byexplosion.Avoid installing this product in locationswhere it is subject to damage by salt orcorrosive gas.Otherwise the mounting fixtures will deteriorate,causing the product to fall down and leading toaccidents.Use the specified mount bracket.Failure to observe this may cause a drop result-ing in injury or accidents.Do not rub the edges of metal parts withyour hand.Failure to observe this may cause injury.Tighten screws and mounting fixtures tothe specified torque.Failure to observe this may cause a drop result-ing in injury or accidents.