Panasonic WV-CW480S Operating Instructions Manual

Also see for Super Dynamic III WV-CW480S: Brochure & specs Specification sheet Specifications Operating instructions

Contents

Panasonic WV-CW480S Operating Instructions Manual Manual pdf 29 page image

29Setting ProceduresFirst, select a language for menu display and camera ID display.Language Setup (LANGUAGESETUP)1. Select LANGUAGE on the top menu andpress the [SET] button.→ The LANGUAGE SETUP menu opens.2. Select a language. The default setting isEnglish.Available languages: ENGLISH, FRANÇAIS,ESPAÑOL, DEUTSCH, ITALIANO, êìëëäàâ, CHINESE, JAPANESE3. Select SET on the menu and press the [SET] button.1. Camera Identification Setting (CAMERA ID)Assign a name to the camera using up to 16 characters to display it overlaying on the camerapicture in the selected position.Note: If you change the language selection afterthe assignment of camera ID, it will beerased.1. On the CAMERA SETUP menu, select ON↓ orOFF↓ for CAMERA ID and press the [SET]button.ON↓: Displays entered camera ID.OFF↓: Does not display the ID.→ The CAMERA ID menu opens.2. Select a character from the character areaand press the [SET] button.→ The selected characters are displayed inthe editing area.3. Repeat these procedures until all charactersare entered.• To enter a blank space, select SPACE andpress the [SET] button.• To replace a specific character in the editingarea:1. Move the cursor to the editing area andthen move the pointer to the character tobe replaced pressing the [LEFT] and[RIGHT] buttons.2. Move the cursor to a candidate characterin the character area and press the [SET]button.**CAMERA SETUP** 1/2CAMERA ID OFFALC ALCSHUTTER OFFAGC ON(HIGH)SENS UP OFFSYNC INTWHITE BAL ATW1MOTION DET OFFDNR HIGHRESOLUTION HIGHBW MODE↵↵↵↵CAMERA ID0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ().,'":;&#!?=+-*/%$SPACE POSIRET TOP END RESET................CharacterCursorPointerCharacterAreaCommandEditingAreaFLOOR 1 Highlighted**LANGUAGE SETUP**LANGUAGE ENGLISHSETRET TOP END