Panasonic WV-CW504SE Installation Manual

Also see for WV-CW504SE: Operating instruction Operating instructions

38Specifications• BasicPower source: WV-CW500: 220 to 240 V AC 50 HzWV-CW504: 24 V AC 50 Hz, 12 V DCPower consumption: WV-CW500: 5.1 W (without heater unit)16 W (with heater unit)WV-CW504: 24 V AC: 3.4 W (without heater unit)14 W (with heater unit)12 V DC: 280 mA*Ambient operating temperature: –10 °C to +50 °C–30 °C to +50 °C**Ambient operating humidity: Less than 90 % (no condensation)Water resistance: Camera: IEC60529 (IP66)***Shock resistance: 50J, IEC60068-2-75Video output: VBS: 1.0 V [p-p]/75 Ω, PAL, BNC connectorDimensions: ø164 mm x 146 mm (H), 191.5 mm (W) (Base Cover)Weight: WV-CW500: Approx. 1.9 kgWV-CW504: Approx. 1.7 kgCamera attachment: 100 gMounting bracket: 350 gFinish: Main body: Aluminum die cast, light grayDome cover: Clear polycarbonate resin* When using 12 V DC power supply, the optional heater unit is unavailable.** With heater unit WV-CW5H (option)*** Applicable only when the installation and waterproof process are done properly.• CameraImage sensor: 1/3 inch interline transfer CCDEffective pixels: 976 (H) x 582 (V)Scanning area: 4.8 mm (H) × 3.6 mm (V)Scanning system: 2:1 interlaceScanning frequency: Horizontal: 15.625 kHz Vertical: 50 HzSynchronization: INT (internal sync)/VD2/LL* (Power supply synchroniza-tion)* Phase adjustableResolution: Horizontal: 650 TV lines typ. (color mode)700 TV lines or more (BW mode),Vertical: 400 TV lines or more (at center)Minimum illumination: When using clear dome cover:Color Mode: 0.1 lx at F1.4 WIDE0.003 lx (sensitivity up x32, at F1.4 WIDE)*BW mode: 0.01 lx at F1.4 WIDE0.0003 lx (sensitivity up x32, at F1.4WIDE)*