Panasonic WV-CW964 Operating Instructions Manual

Also see for Super Dynamic III WV-CW960: Brochure & specs Specifications Operating instructions Operating instructions

Panasonic WV-CW964 Operating Instructions Manual Manual pdf 25 page image

-25-3. Use the joystick to move the cursor the character youwant to input, and then press the CAM (SET) button.The text input procedure is the same as that forcamera ID input.See steps 3 through 5 under “Camera ID Settings”on page 22 for information about inputting the textfor the preset ID and specifying its position on thedisplay.To copy the preset ID of another position numberMove the cursor to COPY, and then press the CAM(SET) button. This displays the preset ID of theposition number preceding the one you arecurrently configuring. Each press of the CAM (SET)button scrolls back to the next sequential positionnumber and displays its preset ID.■ Language Setting1. Move the cursor to LANGUAGE O, and then pressthe CAM (SET) button.2. On the 8-language selection menu that appears,select the language you want to use.The factory default setting is English.* All of the example screens in these OperatingInstructions show English display messages.3. Move the cursor to SET, and then press the CAM(SET) button.When you switch the languages, the password andtitles are deleted.* The item that was set flashes when the language isbeing changed and stops flashing when thelanguage has been changed. Do not operate thesystem controller when changing settings.* If you have selected either Japanese or Chinese asthe language, only the IDs and titles can be set inkatakana or Chinese.* The “LANGUAGE” display remains in English evenwhen the language setting is changed.■ Advanced Menu SettingsThe advanced setup menu can be displayed from thesetup menu.1. Display the setup menu (page 22), move the cursorto → ADVANCED SETUP, and then press the CAM(SET) button.This will display the advanced setup menu.All items can be set on the advanced setup menu.To switch back to the quick setup menu from thedetailed menu, move the cursor to →QUICK SETUP, and then press the CAM (SET) button.Refer to the pages below for details of setup menuitems.q CAMERA Camera Settings Page 26w PAN/TILT Pan/Tilt Settings Page 31e ALARM Alarm Settings Page 39r SPECIAL Special Settings Page 42t COMMUNICATION* Communication SettingsPage 21y SCENE SELECT Scene Select SettingsPage 23u LANGUAGE Language SettingThis pagei QUICK SETUP Quick Menu SettingsPage 22o PASSWORD LOCK Password SettingsPage 45* This item appears only when RS485 settings areconfigured with the DIP switches.PRESET NO. 1*0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ().,'":;&#!?=+-*/%$SPACECOPY POSI RET RESETDOOR............MODEL WV-CW964CAMERAPAN/TILTALARMSPECIALCOMMUNICATIONSCENE SELECTLANGUAGE→QUICK SETUPPASSWORD LOCK OFFqetuowryi