Panasonic WV-NS320 Operating Instructions Manual

Panasonic WV-NS320 Operating Instructions Manual Manual pdf 18 page image

-18-Preliminary SetupPrior to connection to the system, you need to set up anetwork address for the camera by one-to-one connec-tion with a PC.The factory default parameters are as follows:IP address: 192.168.0.10Subnet mask: 255.255.255.0Gateway: 192.168.0.1HTTP port number: 801. Enter an IP address, "http://192.168.0.10" for exam-ple, in the address bar of the browser to displaythe "Main Menu" window of the WV-NS320/NS324Ecamera.2. Click the [Setup Menu] button. The authenticationdialog window appears.3. Enter "admin" in the "User Name" input box.According to the default setting, you need not enterthe password. The "Network Setup" page appears.Network Cable (Cross type)4. Set the following parameters.Note: Ask your system administrator about param-eters if you are unsure.IP Address: Enter numbers 0 through 255 into foursections split by dots.Netmask: Enter numbers 0 through 255 into foursections split by dots.HTTP Port: Enter different numbers for each whenmultiple cameras are connected.DHCP (Dynamic Host Configuration Protocol):When set to "ON", you need not input the IPaddress and netmask.DNS (Domain Name System): Set to "ON" whenusing DNS. Enter the primary address. If nec-essary, enter the secondary address.When set to "AUTO", the DHCP server willautomatically send you an address.DDNS (Dynamic DNS): Consult your systemadministrator.Note: You can correct the DHCP setting to "OFF"via the "Panasonic IP Setup" software or"Camera Control" window if you have wronglyset DHCP to "ON" in a none-DHCP/DHCP serv-er system.For details refer to "Setup" included in the"Panasonic IP Setup" Software provided.5. Click the [SET & REBOOT] button. The changedparameters will be validated, and the camera andthe PC will restart.Notes:• Do not omit step 4 above to validate newparameters.• Wait around 5 seconds or more when execut-ing [SET & REBOOT] button.6. Close the browser software, and the PC.