Panasonic WV-PB5564E Instructions Manual

Contents

specifications

Panasonic WV-PB5564E Instructions Manual Manual pdf 1 page image

-1-Alarm BoardWV-PB5564EBefore attempting to connect or operate this product, please read these instructions completelyPREFACEThe WV-PB5564E Alarm Board is provided for expanding the system capability of the MatrixSwitcher.When handling this board, hold only by circuit board edges. Otherwise components on theboard may be damaged by static electricity.CautionAPPEARANCE1. Alarm Number displayThis display indicates the alarm input number when the associated alarm sensor unit is activat-ed.Note: The display indicator lights up as shown below When the alarm number is over one hun-dred.2. Mode Selection Switch (MODE)This rotary switch, in combination with the test switch, is used to select the alarm test mode.Mode 0: Press the Test Switch to receive, from memory, a chronologically organized display (inthe Alarm Number Display) of all alarms received from the Alarm Input Connector.Mode 1: Press the Test Switch to simulate receiving alarm inputs 1-64 in ascending order, onealarm per second. Use this mode to test the system for Alarm Mode-1, Mode-2 or Mode-3set up.Mode 2: Press the Test Switch to simulate receiving alarm inputs 1-64 all at the same time. Usethis mode to test the system for Alarm Mode-1, Mode-2 or Mode-3 set up.Mode 3-9: These modes are not available.Note: The alarm inputs 65-128 are activated above modes if the SW1 on the board is set atalarm number 65-128. Refer to the BOARD SETTING on page 2.3. Test Switch (TEST)This switch is used to run the alarm test mode in combination with the Mode Selection Switch.4. Reset Switch (RESET)This switch is used to stop the alarm test mode or clear alarm the records from the internalmemory.33-64ALARMTEST1-32005RESETMODEqwert0 0indicator

/ 4

Related manuals for Panasonic WV-PB5564E