5INSTALLATION Mounting in the Rack1. Remove the four rubber feet by removing the fourscrews on the bottom of the camera drive unit.2. Place the rack mounting brackets on both sides of thecamera drive unit and tighten the six supplied screws(M3x10).3. Install the camera drive unit with the rack mountingbrackets on the rack using four screws (not supplied).Cautions:• Do not block the ventilation opening or slots in thecover to prevent the appliance from overheating.• Always keep the inside rack temperature below45°C (113° F).• The cooling fan inside the camera drive unit is sub-ject to wear and need to be replaced periodically.• Secure the rear of the appliance to the rack byusing additional mounting brackets (procuredlocally) if the rack is subject to vibrations.Remove 4 rubber feetSix screws (Supplied)Fix the rack mounting bracketsThe installations described below should be made byqualified service personnel or system installers.

operating instructions

PREFACE

Front View

INSTALLATION

Panasonic WV-PS154 Operating Instructions Manual