19 Maintenance of the camera [Maintenance]System log check, firmware upgrade, status check and initialization of the setup menu can be performed onthis page.The “Maintenance” page has 4 tabs; the [System log] tab, the [Upgrade] tab, [Status] tab and the [Defaultreset] tab.19.1 Check the system log [System log]Click the [System log] tab of the “Maintenance” page. (®page 51, page 53)Up to 4,000 system logs can be saved on the SD memory card when the SD memory card is inserted afterselecting “Use” for “SD memory card” on the [SD memory card] tab (®page 61).When “Not use” is selected for “SD memory card”, up to 100 system logs can be saved on the built-in memoryof the camera.When the saved system logs have reached the maximum number, the newer logs will overwrite the oldersystem logs. In this case, the oldest log is the first to be overwritten.The system logs will be displayed in group of 100 logs each.When using the SD memory card, the logs will be saved even when the power of the camera is turned off.When not using the SD memory card, the logs will be deleted when the power of the camera is turned off.Note• When “VGA Quad streams [4:3]” is selected for “Image capture mode”, up to 100 system logs can besaved. The logs will be deleted when the power of the camera is turned off.[Next 100 >>]When clicking “Next 100 >>”, the next 100 system logs will be displayed.[<< Previous 100]When clicking “<< Previous 100”, the previous 100 system logs will be displayed.[No.]The serial number of the system log will be displayed.[Time & date]Time and date at the error occurrence will be displayed.Note• When “Off” is selected for “Time display format” on the [Basic] tab (®page 57), time & date of logs willbe displayed in 24-hour format.[Description]The descriptions about the system log will be displayed. Refer to page 206 for further information about thesystem logs.194 Operating Instructions19 Maintenance of the camera [Maintenance]
