28Important Information (this document) .................1 pc.Installation Guide ................................................. 1 setWarranty card ...................................................... 1 setCD-ROM*1 ..........................................................1 pc.Code label*2 ........................................................1 pc.The following parts are used during installation procedures.SF V631L SF V611LBase bracket .......................................................1 pc.Attachment plate .................................................1 pc.Fixing screws for attachment plate(M4 x 8 mm) ..................... 5 pcs. (of them, 1 for spare)Template A (for the attachment plate) ............. 1 sheet.Template B (for the base bracket) ................... 1 sheet.Waterproof tape...................................................1 pc.Bit .......................................................................1 pc.4P alarm cable ....................................................1 pc.2P power cable ...................................................1 pc.MONITOR OUT conversion plug ..........................1 pc.LAN cable cover ..................................................1 pc.SF R631L SF R611L SF N631L SF N611LAttachment plate .................................................1 pc.Template A (for the attachment plate).............. 1 sheet.Bit .......................................................................1 pc.MONITOR OUT conversion plug ..........................1 pc.Cable tie .......................................2 pcs. (incl. 1 spare)External I/O terminal plug*3 ..................................1 pc.Power cord plug* 3 ...............................................1 pc.*1 The CD-ROM contains the operating instructions and different kinds of tool software programs.*2 This label may be required for network management. The network administrator shall retain thecode label.*3 The external I/O terminal plug and power cord plug are attached to the camera.Standard accessories