23WV-SFV781L WV-SPV781LWaterproof *3: Main body: IP66 (IEC60529), Type 4X (UL50), NEMA 4XcompliantShock resistance: Compliant with IK10 (IEC 62262)Dimensions: When using the attachmentplate:ø228 mm x 189 mm (H){ø8-31/32 inches x7-7/16 inches (H)}Dome radius 80 mm{3-5/32 inches}When using the base bracket:ø228 mm x 225 mm (H){ø8-31/32 inches x8-27/32 inches (H)}Dome radius 80 mm{3-5/32 inches}When directly mounting thecamera to a ceiling or wall:131 mm {5-5/32 inches} (W),130 mm {5-1/8 inches} (H),380 mm {1ft 2-31/32 inches} (D)When using the adapter box133 mm {5-1/4 inches} (W),133 mm {5-1/4 inches} (H),420 mm {1ft 4-17/32 inches} (D)Mass: When using the attachmentplate:Approx. 3.2 kg {7.05 lbs}When using the base bracket:Approx. 3.7 kg {8.16 lbs}When directly mounting thecamera to a ceiling or wall:Approx. 2.6 kg {5.73 lbs}When using the adapter boxApprox. 3.1 kg {6.82 lbs}Finish: Main body:Aluminum die castLight grayDome cover:Polycarbonate resinClear (with rain wash coating)Main body:Aluminum die cast and resin,metallic silverTransparent section of frontcover:Polycarbonate resinClear (with rain wash coating)Others: Tamper-resistant enclosure *4 None*1 Refer to our website (http://security.panasonic.com/pss/security/support/info.html) for furtherinformation about Power source and Power consumption information.*2 In order to be able to switch the monitor output, “8 mega pixel [16:9](15 fps mode)”, “12 megapixel [4:3](15 fps mode)”, or “5 mega pixel [4:3](30 fps mode)” must be selected for “Imagecapture mode”. For information about usage limitations, refer to “2.3.1 Configure the basic set-tings [Basic]” in the “Operating Instructions”. Cannot be used when the output is switched tomonitor output.*3 Only when installation work is properly performed according to the instructions in this book andappropriate waterproof treatment is performed.*4 Component that has a structure on which the screws that are accessible after installation can-not be screwed or unscrewed using an ordinary screwdriver.