Panasonic WV-SPW631LT Quick Start Manual

Also see for WV-SPW631LT: Operating instructions Installation guide Operating instructions

Panasonic WV-SPW631LT Quick Start Manual Manual pdf 1 page image

Steps for camera angle adjustment (For WV-SPW631LT and WV-SPW631LTJ only)1. Slightly loosen the tilting lock screw (about 15°).2. The camera angle is adjustable. If a fine adjustment is necessary, perform the following steps:When the camera is mounted on a wall (a fine upward adjustment is pos-sible):Loosen adjustment screw B.Tighten adjustment screw A, and then slightly tilt the camera upward.After fine adjustment, tighten adjustment screw B.Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}When the camera is mounted on a ceiling (a fine downward adjustment ispossible):Loosen adjustment screw B.Tighten adjustment screw A, and then slightly tilt the camera downward.After fine adjustment, tighten adjustment screw B.Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}tilting lock screwadjustment screw Aadjustment screw Btilting lock screwadjustment screw Badjustment screw A3. Tighten the tilting lock screw.Note:• Adjustment is only possible in either downward or upward direction, depending on the factory settings.• Since the adjustable direction is fixed, you need to readjust the angle by starting over from Step 1 when a fine adjustment is not possible.sL0914-0 PGQW1674ZA Printed in China

/ 2

Related manuals for Panasonic WV-SPW631LT