2.2 Monitor images on a mobile terminalIt is possible to connect to the camera using a mobile terminal via the Internet and monitor images (MJPEGonly) from the camera on the screen of the mobile terminal. Images are refreshed automatically to display thelatest image.The compatible mobile terminals are shown as follows. (As of February, 2013)– iPad, iPhone, iPod touch (iOS 4.2.1 or later)– Android™ mobile terminalsWhen an Android terminal is used, an MJPEG format image is displayed by the Firefox® browser, but a JPEGformat image is displayed by the standard browser.For further information about compatible devices, refer to our website(http://security.panasonic.com/pss/security/support/info.html).IMPORTANT• When the authentication window is displayed, enter the user name and password. The default username and password are as follows.User name: adminPassword: 12345To enhance the security, change the password for the user “admin”. (®page 126)• When “3 mega pixel [4:3]” is selected for “Image capture mode”, images cannot be monitored on amobile terminal. Select “2 mega pixel [16:9]”, “1.3 mega pixel [16:9]”, or “1.3 mega pixel [4:3]” for “Imagecapture mode” to monitor images.• When “2 mega pixel [16:9]” is selected for “Image capture mode”, the maximum image capture size is640x360.Note• It is necessary to configure the network settings of the mobile terminal in advance to connect to theInternet and monitor images from the camera. (®page 136)18 Operating Instructions2 Monitor images on a cellular phone/mobile terminal
