Panasonic WV-SW598 Installation Manual

Also see for WV-SW397: Operating instructions

Contents

Specifications• BasicWV-SW598 WV-SW397Power source: AC 24 V, PoE+ device (IEEE802.3at compliant) or Tested PoE injector (60 W)Power consumption * 1: AC 24 V: 3.5 A/Approx. 55 WTested Power over Ethernet (Injector: 60 W) DC 54 V: 1.0 A/Approx. 50 WPoE+ DC 54 V: 470 mA/Approx. 25 W (Class4 device)Ambient operating temperature:–50 °C to +55 °C {–58 °F to +131 °F} (AC 24 V/ Tested PoE injector (60 W)) * 2–30 °C to +55 °C {–22 °F to +131 °F} (PoE+ device)(Power On range: –30 °C to +55 °C {–22 °F to +131 °F}(AC 24 V/ PoE+ device/ Tested PoE injector (60 W)))Ambient operating humidity: Less than 90 % (no condensation)Storage environmentStorage temperature: –50 °C to +70 °C {–58 °F to +158 °F}Storage humidity: Less than 95 % (no condensation)Monitor output (for adjustment): VBS: 1.0 V [p-p]/75 Ω, composite (BNC)External I/O terminals: ALARM IN 1 (DAY/NIGHT IN)/ ALARM IN 2 (ALARM OUT)/ALARM IN 3 (AUX OUT) (x1 each)DAY/NIGHT IN, ALARM OUT, and AUX OUT can be used by changing the settingsof Terminal 1, Terminal 2, and Terminal 3.Microphone/line input: ø3.5 mm monaural mini jackInput impedance: Approx. 2 kΩ (unbalanced)For microphone input: Applicable microphone: Plug-in power typeSupply voltage: 2.5 V ±0.5 VRecommended sensitivity of microphone: -48 dB±3 dB (0 dB=1 V/Pa, 1 kHz)For line input: Input level: Approx. –10 dBVAudio output: ø3.5 mm stereo mini jack (monaural output):Output impedance: Approx. 600 Ω (unbalanced)External speaker with an amplifier:Output level: -20 dBVWater resistance *3: Main body: IP66 (IEC60529),Type 4X (UL50),NEMA 4X compliantShock resistance: Compliant with IK10 (IEC62262)Dimensions: ø229 mm x 392 (H) mm {ø9-1/32 inches x 15-7/16 inches (H)},diameter of the dome: 160 mm {6-5/16 inches}Mass: Main body: Approx. 5.0 kg {11.02 lbs}Finish: Main body: Aluminum die cast with glazed melamine coating(Coating color: Natural silver)Sunshields*4: ASA resin coating (Coating color: Natural silver)Dome cover section: Clear polycarbonate resin (Rain wash coating) SW598 SW397AClear polycarbonate resin SW397*1 Refer to our website (http://security.panasonic.com/pss/security/support/info.html) for further information about Powersource and Power consumption information.*2 When using the camera in low temperature environments, because the heater warms the camera to keep its internaltemperature above –10 °C {14 °F}, keep the power for the camera always turned on. Perform settings or startupoperations when the ambient temperature is –30 °C {–22 °F} or higher.*3 Only when installation work is properly performed according to the instructions in this book and appropriate waterprooftreatment is performed.*4 It is impossible to remove the main sunshield.• CameraImage sensor: Approx. 1/3 type MOS image sensorEffective pixels: Approx. 2.4 megapixelsScanning area: 5.38 mm (H) × 3.02 mm (V) {7/32 inches (H) x 1/8 inches (V)}Scanning system: Progressive36