13 WX-CT2030 Transceiver#0 Antenna#1 Power LED Indicator#2 Center Module Connector WX-C516 Power Transformer#3 Mounting HoleThis hole is used for mounting the power transformeronto the wall plates.#4 Power PlugTo prevent fire or electrical shock, connect this directlyto a 3-plug grounded receptacle of 120 V AC, 60Hz.#5 Output terminal (SPARE, AC, AC, GND)12 V AC, 1 600 mA (UL Listed) is provided at the twoterminals (indicated as "AC") to be used for the centermodule.Caution:Be sure to connect the wire between the GND(GROUND) of this terminal and that in the trans-former terminal on the center module.To prevent fire or electrical shock, the UL listedpower supply cord (Style SVT) should be used forthe cable for 12 V AC terminal. WX-C1027A Headset#6 Earphone#7 Microphone#8 Cable ClipsUse these clips to attach the cable to your uniform.#9 Headset Plug WX-C550 Speaker Microphone$0$1#3#4#5#6#7#8#9#0#1#2$0 Input CordA pigtail cord is provided for the speaker input. Itslength is approx. 3 meters.$1 Mounting BracketAU-type mounting bracket with screw holes is provid-ed as a standard accessory with the WX-C550.

operating instructions

IMPORTANT SAFETY INSTRUCTIONS

PREFACE

PRECAUTIONS

PANASONIC WX-CC2010 SERIES SYSTEM PARTS AND ACCESSORIES

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

WX-CT2030 Transceiver

WX-CT2020 Order Taker Unit

OPERATION MODE DESCRIPTIONS

Operation Mode 2 (Area Expansion)

Operation Mode 3 (Manager Mode)

Operation Mode 4 (Area Expansion with Manager)

Operation Mode 5 (Double Drive Through)

Operation Mode 6 (Double Drive Through with Area Expansion)

Operation Mode 7 (Double Drive Through with Manager Mode)

PREPARATIONS

Maintenance of Headpad Accessories (WX-C1027A: Non-Scheduled)

OPERATING PROCEDURES

SPECIFICATIONS

Panasonic WX-CC2010 Series Operating Instructions Manual

WX-C516 Power Transformer

WX-CC2010 Series