Panasonic WX-CM470P Operating Instructions Manual

15ENGLISHInstallation by tightening the screws through front panel of order post● Make two holes (ø6 mm {ø1/4 inches}) for the mounting screws near the front opening ofthe order post. Refer to the appearance diagrams “Dimension for settlement” onpage 22 for details on the positions and dimensions of the holes. Make the holesprecisely so that the entire sound apertures of the Microphone can be set in the openingof the order post.● Using the M5 nuts and screws, install the unit on the order post.(Tightening torque: 2 N·m {1.48 lbs·ft})● If there is a space inside the order post, fill it with sound-absorbing materials (includingthe provided materials).Front panel of the order postScrew for installationCaution:● When using locally procured screws and nuts instead of the provided ones, select stainless-steel or plated steel screws and nuts.● The mounting screws need to be longer than the mounting holes on the main unit to preventthe Microphone from falling.● After installation, do a check and make sure that nothing is unsteady and the screws andnuts are tight.● Exercise good care not to generate resonance and abnormal sound from the mounting partsand around the Microphone.WX-CM470P_PUQX1033ZAV1_OI_en.indd 15 2021/10/27 11:20:09