54Making CopiesOther Features■ Concurrent Copying1st job1st job2nd job ReserveCopy2nd job1st jobor Select Function■ Energy Saver (Power Save Mode, Sleep/Shutdown Mode)These modes can save power while the copier is not in use.Power Save ModeEnter■ Skyshot ModeSkyshot allows copying a manuscript without generating dark borders even if the platen cover or ADF is opened.Two types of Skyshot modes can be selected;Digital Skyshot Mode : The scanning area (size) is not pre-determined.Manual Skyshot Mode: The scanning area (size) is pre-registered into memory (M1 and M2) in advance.Digital Skyshot ModeNORMALDefault setting (usually select this mode).QUALITY∗∗∗∗∗For better definition, select the Quality mode.The default setting of Digital Skyshot Mode is“NORMAL”. In this setting, the unit scans once.If there are black areas around the borders inthe copies, set the Digital Skyshot Mode to“QUALITY” to soften the dark borders. In thissetting, the unit scans twice.(See page 58)Opening theADF Number of copies(Max. 999)NOTE ∗ When copying the Quality mode combined with 1 2, BOOK 2, 2PAGE, N in 1, “Quality”mode will be changed to “Normal” mode.∗∗ Sleep Mode/Shutdown Mode and entering timer can be selected by the key operator.(See page 61)● An incorrect exposure may occur when there is a black line at the edge of the original or animage which the copier interprets as a black pattern in the skyshot mode.Sleep/Shutdown Mode∗∗∗∗∗∗∗∗∗∗Automatically enters the Sleep/Shutdown Mode after 15 minutesfrom the last copy.To clearorModes Power Consumption Warm Up TimeNormal Operation Approx. 140 Wh N/APower Save Approx. 28 Wh Min. 30 sec.Sleep Approx. 18 Wh 35 sec.Shutdown Approx. 4 Wh 35 sec.121 221The machine will not go into Sleep/Shutdown Mode when the WeeklyTimer is selected.IndicatorFlash : Power Save ModeLight : Sleep/Shutdown ModeNext copy job can be reserved even if the currentcopy job is not completed.(Requires the optional Hard Disk Drive and ImageMemory (See page 71) to be installed.)