Panasonic Workio DP-C262 Function Manual

Also see for Workio DP-C262: Operating instructions Brochure & specs Scanner guide Facsimile guide Software guide

66Chapter 6 Printer SettingsChapter 6Printer SettingsPrinter SettingsIn Printer User Mode, the following items can be changed.For printing, however, these settings are almost unnecessary because the computer applicationsoftware is usually used to setup printing.Settings by computer application software have priority over the ones in this machine. If the PrinterSettings in the machine are required, consult with a computer literate person. After printing, it isrecommended to reset the settings to the default values.Printer UserNo. Parameter Comments Selective Item StandardSetting0-9 00 Number of Prints Set the number of prints. 1 - 999* 101 Paper Size Set the paper size. A3, B4, A4, B5, A5,11x17, Legal, 8.5x11,5.5x8.5, 8x13, 8.5x13,7.25x10.5, 12x18,Custom8.5x1102 Paper Tray Set the paper tray.z Tray 3 or 4 is available whenthe optional Paper Tray isinstalled.Auto, Bypass, Tray 1,Tray 2, Tray 3, Tray 4Auto03 Print Direction Set the printing direction. Portrait, Landscap(e) Portrait05 2-Sided Print Set duplex printing. Off, On Off06 Bind Edge Set the binding position. Long, Short Long07 Resolution Set the resolution. 1200dpi, 600dpi 600dpi08 Font (PCL) Set the font (PCL). 0 - 99* 009 Symbol Table (PCL) Set the symbol table (PCL). 0 - 35* 1110-19 10 Pitch (PCL) Set the pitch (PCL). 00.44 to 99.99* 10.0011 Point Size (PCL) Set the point size (PCL). 004.00 to 999.75 012.0012 Lines/Page (PCL) Set the number of lines per page(PCL).5 to 123* 6013 Return Character (PCL) Set the return character (PCL). CR, CR+LF CR*Select "Input", and then enter thedesired value.