Panasonic Workio DP-C262 Function Manual

Also see for Workio DP-C262: Operating instructions Brochure & specs Scanner guide Facsimile guide Software guide

46Chapter 4 Fax/Email SettingsExample : LDAP ServerTo search an Email Address or a Fax Nu mberon LDAP Server, the following user parameter settingsare required.Set the above items according to the descriptions below.z For details about LDAP search, refer to Searching for a Destination in the Operating Instructions (ForFacsimile and Internet Fax) on the provided CD-ROM.z This feature is available in certain countries only.LDAP Server Name (User parameter 15)This setting is required only when “29 DNS Server Address” in General Settings is set to “Yes”.When the setting is “No”, set “16 LDAP Server IP”. (See page 48)1 Press the Function key.2 Select “Fax/Email Settings”.3 Select “04 Key Operator Mode”.4 Enter the Identification Code (4-digit),and then select “OK”.5 Select “00 User Parameters”.LDAP Server Name User parameter 15: LDAP Server NameLDAP Server IP User parameter 16: LDAP Server IPLDAP User Name User parameter 17: LDAP User NameLDAP Password User parameter 18: LDAP PasswordLDAP Search Base User parameter 19: LDAP Search Base