Panasonic Workio DP-C262 Operating Instructions Manual

Also see for Workio DP-C262: Operating instructions Brochure & specs Scanner guide Facsimile guide Software guide

Contents

34Chapter 1 Basic Menu FeaturesRecalling a Preset Job Stored in MemoryThe specific copy job will be done by recalling the registered preset jobs.A job called “Double Exposure” is set as default.• Refer to Double Exposure in the Operating Instructions (For Basic Operations) of provided booklet.z When storing a preset job in memory, refer to Storing a Job in Memory. (see page 33).z “M1”/”M2” cannot be registered when Manual Skyshot Mode is selected. Refer to the Operating Instructions(For Function Parameters).1 Place original(s).z Refer to Placing Originals (Copy) in theOperating Instructions (For BasicOperations) of provided booklet.2 Press the Copy key if set in otherfunction mode.3 Select “Preset Jobs”.4 Select a stored job.z Job buttons without names, indicate thatthere are no jobs registered.A confirmation screen appears, asking toconfirm the job recalled.5 Select “Close”.Job settings are reflected.6 To confirm the job settings, select“Confirm Settings”, and then touch“Close”.z To change the setting, refer to theConfirming the Selected Copy Features(see page 32).7 Enter the desired number of copies.8 Press the Start key.