20. Debug Software Command List223To clear the debug buffer:To upload the messages stored in debug buffer to TFTP server:20.3. debug output DescriptionUse the command to set a specified module's debug message output to debug buffer orlocal console. If the user uses the command in a Telnet session, the error message also isoutput to the local console.When selecting to output to the debug buffer and there are debug messagesbeing outputted, the system memory pool will be used as the debug buffer.The functions which will use the system memory pool resource may fail toexecute command such as download and upload firmware, or saveconfiguration. If you want to execute these commands successfully, pleaseuse the command "debug buffer clear" to release the system's memory poolresources manually first. Formatdebug output [module | all] [buffer | console] ParametersZxxx0:admin# debug buffer clearCommand: debug buffer clearSuccess.Zxxx0:admin#Zxxx0:admin# debug buffer upload_toTFTP 10.0.0.90 debugcontent.txtCommand: debug buffer upload_toTFTP 10.0.0.90 debugcontent.txtConnecting to server................... Done.Upload configuration................... Done.Zxxx0:admin#module Specifies the module list.Enter the module list here.all Control output method of all modules.buffer Direct the debug message of the module output to debug buffer(default).console Direct the debug message of the module output to local console.ワヰヵユワヰヵユ
