Panasonic ZT60 Series Instruction Manual

Contents

All settingsPicture3D settingsMENU Menu > Picture > 3D settingsAuto detect 3D(Off/Auto 1/Auto 2)Auto 1: Switches to 3D display when 3D indication is available (HDMI (3D),AVCHD file, etc.)Auto 2: Same as Auto 1. Also detects 3D signal by identifying similar image inside-by-side or top-and-bottom 3D formats.Note: Choose 3D mode manually when auto detection is not available.3D signal notification(Off/On)On: Displays a message according to the signal received by the Auto detect3D.3D refresh rate(96Hz*/100Hz/120Hz) *24Hz onlyReduces juddering and flicker noises of the 3D images when using the 3DEyewear.100Hz: If light appears to flicker under fluorescents (or dimmers) of 50 Hz.120Hz: If light appears to flicker under fluorescents (or dimmers) of 60 Hz.Gray-out in 2D mode2D 3D depth(High/Mid/Low)Adjusts the simulated 3D depth perception effect of the 2D incoming signal.3D adjustment(Off/On)Adjust the left eye versus right eye depth effect of the image. Set to On toadjust Effect (-3 to +3).Gray-out in 2D modeMENU Menu > Picture > 3D settingsMENU Menu > Picture > 3D settingsMENUMENU Menu > Picture > 3D settingsMenu Picture 3D settingsAuto detect 3D(Off/Auto 1/Auto 2)Auto 1: Switches to 3D display when 3D indication is available (HDMI (3D),AVCHD file, etc.)Auto 2: Same as Auto 1. Also detects 3D signal by identifying similar image inside-by-side or top-and-bottom 3D formats.Note: Choose 3D mode manually when auto detection is not available.Auto detect 3D(Off/Auto 1/Auto 2)Auto 1: Switches to 3D display when 3D indication is available (HDMI (3D),AVCHD file, etc.)Auto 2: Same as Auto 1. Also detects 3D signal by identifying similar image inside-by-side or top-and-bottom 3D formats.Note: Choose 3D mode manually when auto detection is not available.Auto detect 3D(Off/Auto 1/Auto 2)Auto 1Auto 23D signal notification(Off/On)On: Displays a message according to the signal received by the Auto detect3D.3D signal notification(Off/On)On: Displays a message according to the signal received by the Auto detect3D.3D signal notification(Off/On)On Auto detect3DAuto detect3D3D refresh rate(96Hz*/100Hz/120Hz) *24Hz onlyReduces juddering and flicker noises of the 3D images when using the 3DEyewear.100Hz: If light appears to flicker under fluorescents (or dimmers) of 50 Hz.120Hz: If light appears to flicker under fluorescents (or dimmers) of 60 Hz.3D refresh rate(96Hz*/100Hz/120Hz) *24Hz onlyReduces juddering and flicker noises of the 3D images when using the 3DEyewear.100Hz: If light appears to flicker under fluorescents (or dimmers) of 50 Hz.120Hz: If light appears to flicker under fluorescents (or dimmers) of 60 Hz.3D refresh rate(96Hz*/100Hz/120Hz) *24Hz only100Hz120HzGray-out in 2D modeGray-out in 2D mode2D 3D depth(High/Mid/Low)Adjusts the simulated 3D depth perception effect of the 2D incoming signal.2D 3D depth(High/Mid/Low)Adjusts the simulated 3D depth perception effect of the 2D incoming signal.2D 3D depth(High/Mid/Low)3D adjustment(Off/On)Adjust the left eye versus right eye depth effect of the image. Set to On toadjust Effect (-3 to +3).3D adjustment(Off/On)Adjust the left eye versus right eye depth effect of the image. Set to On toadjust Effect (-3 to +3).3D adjustment(Off/On)OnEffectEffect -3 +3Gray-out in 2D modeGray-out in 2D mode174 (0600205)