Panasonic i-PRO WV-X6531NEG Installation Manual
Step3Fixing the cameraStep2Making connectionsWV-X6531Navs0217-5049 PGQX2158UA Printed in ChinaWV-X6531NNetwork CameraModel No. WV-X6531N / WV-X6531NRFWV-X6531NEG / WV-X6511NWV-S6530NInstallation GuideIncluded Installation Instructions• Before attempting to connect or operate this product, please read these instructions carefully andsave this manual for future use.• Before reading this manual, be sure to read the Important Information(included in the CD-ROM).• For information about how to perform the settings and how to operate the camera, refer to theOperating Instructions on the provided CD-ROM.• The model number is abbreviated in some descriptions in this manual.• WV-X6531NRF and WV-X6531NEG are the same model as the Network Camera WV-X6531N.For U.S. and Canada:Panasonic Corporation of North AmericaTwo Riverfront Plaza, Newark, NJ 07102-5490http://business.panasonic.com/Panasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada1-877-495-0580https://www.panasonic.com/ca/For Europe and other countries:Panasonic Corporationhttp://www.panasonic.comPanasonic CorporationOsaka, JapanAuthorised Representative in EU:Panasonic Testing CentrePanasonic Marketing Europe GmbHWinsbergring 15, 22525 Hamburg, GermanyPanasonic Corporation 2017The model number and serial number of thisproduct may be found on the surface of the unit.You should note the model number and serialnumber of this unit in the space provided andretain this book as a permanent record of yourpurchase to aid identification in the event oftheft.Model No.Serial No.NOTE: This equipment has been tested and foundto comply with the limits for a Class A digitaldevice, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonableprotection against harmful interference when theequipment is operated in a commercial environ-ment. This equipment generates, uses, and canradiate radio frequency energy and, if not installedand used in accordance with the instruction man-ual, may cause harmful interference to radio com-munications.Operation of this equipment in a residential area islikely to cause harmful interference in which casethe user will be required to correct the interfer-ence at his own expense.FCC Caution: To assure continued compliance,(example - use only shielded interface cableswhen connecting to computer or peripheral devic-es). Any changes or modifications not expresslyapproved by the party responsible for compliancecould void the user’s authority to operate thisequipment.For U.S.A.CAN ICES-3(A)/NMB-3(A)For CanadaWARNING:• To prevent injury, this apparatus must be secure-ly attached to the wall/ceiling in accordance withthe installation instructions.• All work related to the installation of this productshould be made by qualified service personnelor system installers.• The installation shall be carried out in accor-dance with all applicable installation rules.• The connections should comply with local elec-trical code.• This equipment is compliant with Class A ofCISPR 32. In a residential environment thisequipment may cause radio interference.• Batteries (battery pack or batteries installed)shall not be exposed to excessive heat such assunlight, fire or the like.CAUTION:• Any changes or modifications not expresslyapproved by the party responsible for compli-ance could void the user’s authority to operatethe equipment.• The network camera is only intended for a con-nection to an ethernet or PoE+ network withoutrouting to the outside plant.Disposal of Old Equipment and BatteriesOnly for European Union and countries with recycling systemsThese symbols on the products, packaging, and/or accompanying documents mean that usedelectrical and electronic products and batteries must not be mixed with general household waste.For proper treatment, recovery and recycling of old products and used batteries, please take themto applicable collection points in accordance with your national legislation.By disposing of them correctly, you will help to save valuable resources and prevent any potentialnegative effects on human health and the environment.For more information about collection and recycling, please contact your local municipality.Penalties may be applicable for incorrect disposal of this waste, in accordance with nationallegislation.Note for the battery symbol (bottom symbol)This symbol might be used in combination with a chemical symbol. In this case it complies with therequirement set by the Directive for the chemical involved.: Direct current symbol: Alternating current symbolImportant safety instructions1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.6) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (includingamplifiers) that produce heat.7) Only use attachments/accessories specified by the manufacturer.8) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with theapparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injuryfrom tip-over.S3125A9) Unplug this apparatus during lightning storms or when unused for long periods of time.10) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been dam-aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects havefallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally,or has been dropped.TroubleshootingOpen Source Software• This product contains open source software licensed under GPL (GNU General Public License), LGPL(GNU Lesser General Public License), etc.• Customers can duplicate, distribute and modify the source code of the software under license of GPL and/or LGPL.• Refer to the “readme.txt” file on the provided CD-ROM for further information about open source softwarelicenses and the source code.• Please note that Panasonic shall not respond to any inquiries regarding the contents of the source code.Before requesting service, refer to the Important Information (included in the CD-ROM) and “Troubleshooting”in the Operating Instructions (included in the CD-ROM) and confirm the trouble.The following notations are used when describing the functions limited for specified models. The functionswithout the notations are supported by all models.X6531X6531 :The functions with this notation are available when using the model WV-X6531N.X6511 :The functions with this notation are available when using the model WV-X6511N.S6530 :The functions with this notation are available when using the model WV-S6530N.About notationsPreparationsOther items that are needed (not included)Prepare the required parts for each installation method before starting the installation. The followingare the requirements for the various installation methods.Installation method MountingscrewMinimum pull-outstrength*1⸮When hanging the camera from ceilingUse the ceiling mount bracket (WV-Q121B *2 ).M10 screws/4pcs. 1411 N {317 lbf}ⸯWhen installing the camera on a wallUse the wall mount bracket (WV-Q122A *2 ).M10 screws/4pcs. 823 N {185 lbf}IMPORTANT:• Prepare four mounting screws (M10) to be mount-ed on ceiling and wall separately.• Select screws according to the material of thelocation that the camera will be mounted to. In thiscase, wood screws and nails should not be used.• If the mounting location such as plaster board istoo weak to support the total weight, the area shallbe sufficiently reinforced.IMPORTANT:• The mount bracket (locally procured) should have the configuration that enablesfixation of safety wire from camera.⇒Go to Step 1【1】.WV-Q122AWV-Q121B⸮ ⸯPreparations before installation【1】Prepare the cables from camera side.◆When the only necessary connection tocamera is an Ethernet cableUse only RJ45 network cable coming from camera.Do not remove the cable case. Use it as it is.◆When using 24 V AC, EXT I/O device, oraudio I/O deviceRemove the cable case fixed by five screws on theupper part of camera and pull out power cable,audio I/O cable, and alarm I/O cable stored in it.Note:• Do not use the removed cable case and fivescrews.RJ45 (female)NetworkcableAlarm input/output·Audio input/output cablePowercableCable caseMain sunshieldrear cover【2】Insert an SD memory card (locallyprocured) as occasion demands.* SDXC/SDHC/SD memory card is described asSD memory card.Insert an SD memory card following the procedureshown below. For the detailed procedure, refer toImportant Information on the provided CD-ROM.① Remove the main sunshield rear cover.② Loosen two locking screws of water-resistantcap and pull the water-resistant cap andtoward you.③ Insert an SD memory card into the SDmemory card slot.④ Attach water-resistant cap and sunshield rearcover to the original position in order.Recommended tightening torque of the water-resistant cap locking screws:0.69 N·m {0.51 lbf·ft}SD memorycard slotSD memorycard (withlabel sidefacing down)Water-resistant cap*1 The minimum pull-out strength is the value per screw.*2 For details on procedure for attaching mount bracketand camera, read the operating instructions of eachmount bracket.◆When using Q121B (option) or Q122A (option)⇒Go to Step 1【3】.◆When using the mount bracket (locally procured).Prepare a mount bracket.The following figure shows an example of the camera mounted on a ceiling with a bracket.R 1-1/2, 11crest, deep 30 MAX(taper pipe thread)RP 1-1/2, 11 crest,deep 30 MAX(parallel pipe thread)60 mm {2-3/8 inches} 25 mm {31/32 inches}85 mm {3-11/32 inches}(fl58)InstallationThe installation tasks are explained using 4 steps.⇨ ⇨⇨Step1Fix the mount bracketand hang the cameraStep4Configure the networksettings• Remove the camera using the reverse order of the installation procedures.IMPORTANT:• After waterproofing the hole for fixing mountbracket and the port for pulling out the cableon the installation surface, fix the mountbracket on the installation surface.• Adjust the length of cable from cameraattachment port of attachment pipe to cableend to 150~160mm {5-29/32 inches~6-5/16inches}. (If the cable that is pulled out is toolong, storage after wiring becomes difficult.Adjust the cable length carefully.)• For the number of fixing screws and theminimum pull-out strength (per 1 pc.), refer tothe operating instructions of mount bracket(locally procured).• Ensure the minimum pull-out strength (per1 pc.) that has sufficient allowance for totalmass of mount bracket (locally procured),attachment pipe, and camera etc.⇒Go to Step 1【5】.Step1 Fix the mount bracket and hang the cameraThe following explains an example of installation using mountbracket (locally procured).The right figure shows an example of the camera mounted on a ceiling with amount bracket (locally procured).When waterproofing, use waterproof material to fill in gaps and holesbetween the attachment pipe and the mount bracket.【1】Fix the attachment pipe (accessory) to the mount bracket(locally procured).① Fix the attachment pipe to the mount bracket.② Fill the gap between the mount bracket and attachment pipe withwaterproof material (locally procured) such as silicon clay.③ Pass the cables from the ceiling through the mount bracket.【2】Fix the mount bracket (locally procured) on the installation surface.Fix a mount bracket to the installation surface on the ceiling by using appropriate bolts,nuts or the like (locally procured).150~160mm{5-29/32 inches~6-5/16 inches}About the user manualsProduct documentation is composed of the following documents.• Installation Guide (this document and additional leaflet): Explains installation, mounting, cable connec-tions, and network connections. This manual uses the WV-X6531N as an example in the explanations.• Important Information (included in the CD-ROM): Provides basic information about the product.• Operating Instructions (included in the CD-ROM): Explains how to perform the settings and how to operatethis camera.Adobe® Reader® is required to read these operating instructions on the provided CD-ROM.When the Adobe Reader is not installed on the PC, download the latest Adobe Reader from the Adobe web siteand install it.The external appearance and other parts shown in this manual may differ from the actual product within thescope that will not interfere with normal use due to improvement of the product.Standard accessoriesInstallation Guide(this document and additional leaflet) .................. 1 pc.IMPORTANT SAFETY INSTRUCTIONS ............... 1 pc.Warranty card*1 .................................................. 1 pc.CD-ROM*2 .......................................................... 1 pc.Code label*3........................................................ 1 pc.*1 Excluding WV-X6531NRF and WV-X6531NEG.*2 The CD-ROM contains the operating instructions and different kinds of tool software programs.*3 This label may be required for network management. Use caution not to lose this label.Waterproof tape*4 The screws are necessary when installing the camera on a separately sold mount bracket.Cable cover ........................................................ 1 pc.Attachment pipe ................................................. 1 pc.Front/rear sunshields ...........................................1 setFront/rear sunshields fixing screw........................................ 2 pcs. (of them, 1 for spare)Waterproof tape.................................................. 1 pc.RJ45 waterproof connector cover ...................... 1 pc.RJ45 waterproof connector cap ......................... 1 pc.8P alarm cable ................................................... 1 pc.24 V AC power supply connector kit....................1 set(Power supply connector housing: 1 pc., Contact: 3 pcs.)Hexagon screw (M5)*4 ........................................ 5 pcs.(of them, 1 for spare)Rain wash coating caution label...........................1 pc.The following parts are used during installation procedures.* For step 4, refer toother leaflet⇨ ⇨②150~160mm{5-29/32 inches~6-5/16 inches}③①Attachment pipe(accessory)Mount bracket(locally procured)WaterproofmaterialPlease read "Precautions for installation" of "Important Information" in theprovided CD-ROM closely before starting installation/connection of the camera.Attachmentpipe(accessory) |
Related manuals for Panasonic 4010869262064
Panasonic WV-X6531N Installation Manual
Panasonic i-PRO WV-SC387 Installation Manual
Panasonic WV-SFV531 Installation Manual
Panasonic WV-SPN531 Installation Manual
Panasonic WV-SFV531 Installation Manual
Panasonic WV-SPN531A Installation Manual
Panasonic WV-NF302 Installation Manual
Panasonic WV-SP509 Installation Manual
Panasonic WV-NW960 Installation Manual
Panasonic WV-SW559 Installation Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine