1.5 During a ConversationOperations 1-39Basic Operations• During a 5-party conference, you cannot use this feature.• With outside calls, you can put multiple calls on hold. However, with intercom calls, youcan put only one call on hold. One way around this is to use the Call Park feature. See twopages ahead.• If a call is placed on hold for more than the programmed time, ringing or an alarm tone willbe heard (Hold Alarm/Hold Recall) and the LCD will flash the following display.Example:— When holding extension 211, Mr. Brown: “211: Brown” will flash.— When holding exchange line, CO 1: “Call on CO 1” will flash.• If “Hold-2” or “Hold-3” is assigned by System Programming, you must dial “50” afterpressing the Recall button.• Only an outside or intercom call can be placed on hold at any one time. If you want to holdboth calls, use the Call Park feature.• 1.5 During a Conversation, “Retrieving a Call on Hold (Call Hold Retrieve)”• 1.5 During a Conversation, “Placing a Call in System Parking Area (Call Park)”• 1.7 Useful Features, “Conference (5-party)”• See the Installation Manual, Section 3, “Hold”.SLTSLTPTPTPT+Prevents other extension users from retrieving your held call. Only the user who held thecall can retrieve it.Placing a call on exclusive holdPTPress HOLD.HOLDPress HOLD again.HOLDDuring a conversation• The line key or INTERCOM light flashes green slowly.• The current call is placed on hold.• The line key or INTERCOM light flashes greenmoderately.• The current call is placed on exclusive hold.Placing a Call on Hold Exclusively (Exclusive Hold)PTPress the line key or INTERCOMwhich is on exclusive hold.COor INTERCOMRetrieving a call on exclusive hold• The line key or INTERCOM light turns steady green.• The held call is released.
