- 17 -Antenna / Cable service without a boxInitial setting1. Connect coaxConnect a COAX wire from either an antenna or Basic Cable service tothe TV’s “ANTENNA/CABLE IN” screw terminal.TV (ANTENNA/CABLE IN)Antenna2. Scan the channelMENU Menu > Setup > ANTENNA/Cable setup > ANTENNA/Cable signal, Auto program1) Select either Cable or Antenna programming source in ANTENNA/Cable signal.2) Select Auto program and then the appropriate scan mode:(All channels / Analog only / Digital only)3) Start scanning.● The tuner setup menu (auto scan, etc.) is only available when INPUT isset to TV.● If no channels are found by the end of the scan, then check thefollowing:– Antenna’s position - or availability of Cable service.– Cable, Satellite or Fiber Optic services with a box are typicallyconnected to the TV’s A/V inputs, preferably HDMI, for best HDpicture. In such a case, the channel scanning is not needed.
