1 Applicable signals 42 Safety Precautions 52.1. General Guidelines 53 Prevention of Electrostatic Discharge (ESD) toElectrostatically Sensitive (ES) Devices 64 About lead free solder (PbF) 75 Service Hint 86 Disassembly 96.1. Removal of the Back Cover 96.2. Removal of the HU-Board 96.3. Removal of the HA-Board 96.4. Removal of the DS-Board 96.5. Removal of the HX-Board 106.6. Removal of the D-Board 106.7. Removal of the P-Board 116.8. Removal of the DN-Board 116.9. Removal of the H3-Board (L, R) 116.10. Removal of the SU-Board and the SD-Board 116.11. Removal of the SC-Board 126.12. Removal of the SS2-Board and the SS3-Board 126.13. Removal of the SS-Board 126.14. Removal of the stand blocks 126.15. Removal of the C1, C2, and the C3-Board 136.16. Removal of the S1-Board 136.17. Removal of the Fan 146.18. Removal of the Escutcheon 146.19. Removal of the V1-Board and the V2-Board 146.20. Removal of the Plasma Panel 157 Location of Lead Wiring 197.1. Lead Wiring (1) 197.2. Lead Wiring (2) 208 Adjustment Procedure 218.1. Driver Set-up 218.2. Initialization Pulse Adjust 228.3. P.C.B. (Print Circuit Board) Remove 228.4. Adjustment Volume Location 238.5. Test Point Location 239 Service mode 239.1. CAT (Computer Aided Test) mode 239.2. IIC mode structure (following items value is sample data.)2710 Adjustment 2810.1. RGB white balance adjustment 2810.2. HD white balance adjustment 3010.3. Power control adjustment 3211 Trouble shooting guide 3311.1. Self Check 3311.2. No Power 35PB /B (BNC), P R/R (BNC) 0.7 Vp-p (75-ohm)AUDIO IN (RCA PIN JACK x 2) 0.5 Vrms (high impedance)PC IN (HIGH-DENSITY MINI-D-SUB 15PIN) Y or G with/sync 1.0 Vp-p (75-ohm)Y or G without/sync 0.7 Vp-p (75-ohm)B/PB /C B:0.7 Vp-p (75-ohm)R/PR/CR: 0.7 Vp-p (75-ohm)HD/VD:1.0 - 5.0 Vp-p (high impedance)AUDIO IN (M3 JACK) 0.5 Vrms (high impedance)SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLESPEAKERS (6Ω) 16 W [8 W + 8 W] (10 % THD)Accessories SuppliedRemote Control Transmitter EUR7636070RBatteries 2 × AA SizeFixing bands TMME203 × 2Dimensions (W × H × D) 47.6” (1,210 mm) × 28.5” (724 mm) × 3.7” (95 mm)Mass (weight)main unit only approx. 79.4 lbswith speakers approx. 88.2 lbsNotes:· Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.CONTENTS Page Page2TH-50PH10UK
