Panasonic viera TX-P42S30Y Operating Instructions Manual

Also see for TX-P42G30E: Operating instructions Service manual

Contents

Identifying Controls11 12 13910123456786TV1 CI slot2 Function selectt[Volume] / [Contrast] / [Brightness] / [Colour] /[Sharpness] / [Tint] (NTSC signal) / [Bass] / [Treble] /[Balance] / [Auto Setup][Music] or [Speech] mode in the Sound Menu3 Channel Up / Down, Value change (when using the Fbutton), Switching the TV On (press either button forabout 1 second when in Standby mode)4 Changes the input mode5 USB 1 / 2 port6 SD Card slot7 HDMI3 terminal8 Headphones jack9 AV2 terminals10 Mains power On / Off switchtUse to switch the mains power.If you turned the TV Off during Standby mode by theremote control last time, the TV will be in Standbymode when you turn the TV On with Mains power On/ Off switch.11 Remote control signal receivertDo not place any objects between the TV remotecontrol signal receiver and remote control.12 C.A.T.S. (Contrast Automatic Tracking System)sensortSenses brightness to adjust picture quality when [EcoMode] in the Picture Menu is set to [On] (p. 15)13 Power and Timer LEDtRed : StandbyGreen : OnOrange : Timer Programming OnOrange (flash) :Recording of Timer Programming or Direct TVRecording in progressRed with orange flash :Standby with Timer Programming On or DirectTV RecordingtThe LED blinks when the TV receives a commandfrom the remote control.Using the On Screen Displays - Operation guideMany features available on this TV can be accessed via the On Screen Display menu.Operation guideOperation guide will help you to operate by using theremote control.Example : [Sound Menu]Main MenuPictureSoundTimerSetup1/2000011Mode MusicBassTrebleBalanceHeadphone VolumeSurroundAuto Gain ControlVolume CorrectionSpeaker Distance to WallOffOffOver 30cmSelectEXIT Selects the basic sound mode. Page upChangeRETURN Page downOperation guideHow to use remote controlMENU Open the main menuMove the cursor / select the menu item / select from arange of optionsMove the cursor / adjust levels / select from a rangeof optionsAccess the menu / store settings after adjustmentshave been made or options have been setBACK/RETURN Return to theprevious menuEXIT Exit the menu systemand return to thenormal viewing screenAuto power standby functionThe TV will automatically go to Standby mode in the following conditions :t no signal is received and no operation is performed for 30 minutes in Analogue TV modet [Off Timer] is active in the Timer Menu (p. 17)t no operation is performed for the period selected in [Auto Standby] (p. 17)tThis function does not affect the recording of Timer Programming and Direct TV Recording.