Pantech C150 User Manual

Also see for C150: User guide

Contents

Pantech C150 User Manual Manual pdf 52 page image

521. Press the [Menu] Soft key, select 4.MEdia Net, and then select 3.GoTo URL.2. Input the URL you want to go to, then press the [OK] key.ProfilesThis function selects or edits WAP connection profiles on your phone.NOTE: The settings for your WAP service are already entered as requiredby your service provider. Care should be taken when you make anymodification to a profile since it may cause WAP to be inoperative.Your phone is compatible with OTA (Over The Air) messages. These areused by service providers to send connection details directly to your phone.Please ask your service provider for details of this service.1. Press the [Menu] Soft key, select 4.MEdia Net, and then select4.Profiles.2. To select a profile, highlight it in the Profile List then press the [OK] key.You cannot select Unedited Profile.To edit a profile, select it in the Profile List then press the [Edit] Softkey to select from the following functions.• Profile Name: Press the [OK] key to change the profile name.• Home URL: Press the [OK] key to edit the Homepage URLprovided by your service provider.• Connection Type: Select either WAP or HTTP.• GSM Settings: This function allows you to set the GSM networkproxy by inputting the following information.Gateway: If you set the Connection Type to WAP, Gateway isdisplayed. If you set it to HTTP is displayed. Press the [OK] keyto display the subfunctions such as IP Address and IP Port,then input the appropriate information for each of the followingsubfunctions, inputting the information provided by your serviceprovider.Data Call Type: Press the Left or Right scroll key to selectISDN or Analog.Dial Number: Press the [OK] key to input the appropriatedialup number.Login ID: Press the [OK] key to input the appropriate login ID.Password: Press the [OK] key to input the appropriatepassword.• GPRS Settings: This menu allows you to set the GPRS networkproxy by inputting the following information.Gateway: If you set the Connection Type to WAP, Gateway isdisplayed. If you set it to HTTP is displayed. Press the [OK] keyto display the subfunctions such as IP Address and IP Port,then input the appropriate information for each of the followingsubfunctions, inputting the information provided by your serviceprovider.APN:Login ID: Press the [OK] key to input the appropriate login ID.Password: Press the [OK] key to input the appropriatepassword.