Pantech C320 User Manual

Pantech C320 User Manual Manual pdf 48 page image

Error messageIf you experience any problem while using your mobile phone, please referto the following checklist. If the problem still persists, contact your dealer ornearest carrier.When the “Insert SIM Card” message appears:Make sure the SIM card is correctly installed. Check to see if the SIM cardis working properly. If it does not work, try to clean the contact points of thecard. If it is out of order, take it to the nearest carrier.When the “Content is too large” message appears:The picture is too large to send instead the caller. It will send the defaultimage instead of chosen image.When the “Message full Please delete” message appears:The received or saved messages are full in your phone or SIM memory.You need to delete the message.When the “Password” message appears in Phone locked state:Enter the phone password. The default password is”0000”. If you cannotremember the password, contact the nearest carrier.When the “Enter PIN1” message appears:Input PIN1. If you cannot remember it, contact the nearest carrier. Youcannot receive calls if your mobile phone becomes locked after entering theincorrect PIN1 on SIM dependency consecutive attempts.When the “No Service” or “Network Search” appears:If you cannot make/receive a call when you are indoors or undergroundswhere the signal strength is poor, move toward a window or go out to anopen area. If you still cannot make a connection, contact the nearest carrier.Troubleshooting checklistWhen audio quality is poor:End a call and try again.When the other party cannot hear you speaking:Your phone may be set to MUTE. Disable the MUTE function.When battery lifetime is shorter than usual:This may happen when you are in an area with low signal strength. Turn offyour phone when it is not in use. Change the battery when battery energyis exhausted.When your mobile phone does not turn on:Make sure your battery is charged. Check to see if your phone works whilerecharging the battery.