Pantech Caper User Manual

Pantech Caper User Manual Manual pdf 17 page image

30 31020304050607013. When you’re connected to the second party, press the SEND Key again tobegin your 3-Way call.If one of the people you called hangs up during your call, you and the remaining callerstay connected. If you initiated the call and are the first to hang up, all three calls willbe disconnected.CALL WAITING FUNCTIONIf you are on a call and you receive another incoming call, you will hear a beep and thecaller’s phone number will appear on the display. With Call Waiting, you may put theactive call on hold while you answer the other incoming call.1. To answer another call while on the phone, press the SEND Key .This places the first call on hold. To switch back to the first caller, press the SENDKey again.CALLING A NUMBER FROM CONTACTS1. From the home screen, press the OK Key to unlock the keypad, then press theRight Soft Key [Contacts].2. Select the Contact entry and press the OK Key [VIEW], then select thedesired phone number.3. Press the SEND Key to place the call.Selecting the Contact entry and then pressing the Send Key will dial the DefaultNumber of the Contact entry automatically.ADJUSTING VOLUMETO ADJUST THE MASTER VOLUME:1. From the home screen, press the OK Key to unlock the keypad, then press theVolume Keys / up or down.2. Select one of the following options and press the OK Key [SET] to save it.All Sounds Off / Alarm Only / Vibrate Only / Low / Medium Low / Medium /Medium High / High• Press the Volume Keys / up or down to adjust Earpiece volume during a call.CALLER ID FUNCTIONCaller ID displays the number of the person calling when your phone rings. If thecaller’s identity is stored in Contacts, the name appears on the screen. The caller IDis stored in the Recent Calls menu.VIBRATE MODEVibrate Mode mutes key tones and alerts for an incoming call or message. To activateVibrate Mode:1. From the home screen, press and hold the Vibration Mode Key to activatevibration mode.2. To deactivate vibration mode, press and hold the Vibration Mode Key .SPEAKERPHONE MODEThe Speakerphone feature lets you hear audio through the speaker and talk withoutholding the phone.1. To activate, press the OK Key to unlock the keypad, then press theSpeakerphone Key . To deactivate, press the Speakerphone Keyagain.USING AUTO KEYPAD LOCK FUNCTIONWhen the backlight of the display is turned off, the all keys are locked. To unlockthem, press any key on the external display with the phone in the closed position“PRESS OK TO UNLOCK KEYPAD” displays. Press the OK Key to unlock the keypad.