54 5501020305060704SPEED DIALSFrom idle mode, calls can be placed to numbers stored in speed dials by sliding thephone up, and pressing & holding the location number on the keypad.1. Slide the phone up, press the [MENU], then press 3. Contacts,5. Speed Dials.2. Highlight the desired Speed Dial position, or enter the Speed Dial digit, thenpress the OK Key [SET].3. Select the desired Contact entry, then press the OK Key.4. Highlight the number you wish to set to speed dial then press the OK Key.5. “ASSIGN SPEED DIAL TO CONTACT?” appears on the screen. Select Yes andpress the OK Key. A confirmation message appears.“Unassigned” appears if the location is available.TO ERASE A SAVED SPEED DIAL1. Slide the phone up, press the [MENU], then press 3. Contacts,5. Speed Dials.2. Select the Speed Dial entry you want to erase.3. Touch the Right Soft Key [Remove].4. “REMOVE SPEED DIAL?” appears on the screen. Select Yes and press the OKKey. A confirmation message appears.IN CASE OF EMERGENCYYour phone has a special menu to organize your emergency contacts and personalinformation.TO ASSIGN EMERGENCY CONTACTSFollow the procedures below to register a Contact to be contacted in case of emergency,or to register a medical record number or other personal info. To register up to threedifferent Contacts to ICE:1. Slide the phone up, press the [MENU], then press 3. Contacts, 6. In Caseof Emergency.Shortcut: From idle mode, slide the phone up and touch the Right Soft Key[Contacts], then select In Case of Emergency and press the OK Key [VIEW].2. Select Contact 1, Contact 2 or Contact 3, then press the OK Key [ADD].3. To select a contact from the Contacts List, press 1. From Contacts, selectthe Contact entry, and then press the OK Key. To add a new contact as an ICECONTACT, press 2. New Contact, enter the info, and then press the OK Key[SAVE].4. The Contact name will be displayed in the place of Contact 1, Contact 2 orContact 3.TO RE-ASSIGN EMERGENCY CONTACTS1. Slide the phone up, press the [MENU], then press 3. Contacts, 6. In Caseof Emergency.2. Select the contact you want to re-assign, touch the Right Soft Key[Options], then press 1. Re-assign.3. To select a contact from the Contacts List, press 1. From Contacts, select theContact entry, and then press the OK Key. To reassign a new contact as an ICECONTACT, press 2. New Contact, enter the info then press the OK Key [SAVE].4. A confirmation message appears.TO UNASSIGN EMERGENCY CONTACTS1. Slide the phone up, press the [MENU], then press 3. Contacts, 6. In Caseof Emergency.2. Select the contact you want to unassign, then touch the Right Soft Key[Options].3. Press 2. Unassign.4. A confirmation message appears.