Pantech Multisync User Manual

SIM card and batteryAbout your SIM cardWhen you subscribe to your network operator, you receive a SIM(Subscriber Identity Module) card containing your registration information,PIN code, etc.Like a credit card, it should be kept secure and handled carefully. Do notbend, scratch or expose it to moisture. Avoid static electricity.To avoid corrupting your SIM card’s memory, always switch off your phonebefore removing or inserting your SIM card.About your batteryYour phone uses a Li-Ion battery. Make sure to use an authorized batteryand charger only. For more details, please inquire at your nearest dealer.NOTE: Your phone is powered by a Lithium Ion (Li-Ion) battery. Unlikeother forms of battery technology, you can recharge your battery whilesome charge remains without reducing your phone’s autonomy due to the“battery memory effect” inherent in those technologies.Installing/removing SIM card and battery1. Remove the battery cover from the unit. To fitthe battery cover, put it on the guide rail andpush up.2. Insert the SIM card into the slot. The gold contactsof the SIM card should go against the metalcontacts of the phone. Put the contacts of thebattery into the hole located at the bottom of theunit insert and press the upper side of the batteryuntil you hear the “click”.3. To remove the battery push the bottom of thebattery to upwards(1) and remove(2) the battery..Push the SIM card in the direction of the arrow asshown.To charge your battery1. To charge, open the protective cover on the top right side andconnect the charger adapter.Make sure you align the connector as the image. If not, it willdamage the charging connector on the phone and will not charge.2211