Pantech PG-1310V User Manual

62enter the edit mode to change the APN.4.2 Username: Pressing the [ ] key allows you to enter the edit mode tochange the username.4.3 Password: Pressing the [ ] key allows you to enter the edit mode tochange the password.5 GSM Settings: This menu allows you to set the GSM network.5.1 Dial Number: Pressing the [ ] key allows you to enter the edit modeto change the dial number.5.2 Line Type: This menu allows you to select the line type. Use the leftor right navigation key to select from the two modes; ISDN and Analogue.5.3 UserName: Pressing the [ ] key allows you to enter the edit mode tochange the username.5.2 Password: Pressing the [ ] key allows you to enter the edit mode tochange the password.6 DNS: Enter the IP address for the Domain Name Server. You mayenter primary and secondary DNS. This function is available onlywhen you are connected to HTTP.6.1 DNS1: It stands for Primary DNS. Pressing the [ ] key allowsyou to enter the edit mode to change the IP address for DNS1.6.2 DNS2: It stands for Secondary DNS. Pressing the [ ] keyallows you to enter the edit mode to change the IP address for DNS2.Cache&Cookie1 Clear Cache: This menu provides the function to clean the data storedin the Cache (recently visited WAP pages).2 Clear Cookies: This menu provides the function to clean thedata stored in the Cookie (recently visited WAP pages).StorageYou can see the list of the WAP offline pages saved during a WAP browsing.During a WAP browsing, to save the current page as an offline page, go to. AdvancedⅣ -> 1.WAP -> 1.10 Navigating the WAP Browser and then seeStorage.Press the [Options] Soft key [ ] to: Open: Opens the saved offline page. Delete: Deletes the saved offline page.Press the [O] key to open the page.SecurityOn selecting the sub-items of this menu, you are asked to input the PINcode of SWIM. If you fail to input the correct PIN code three times, theprocess is cancelled. By default, the PIN code has been set as ‘1234’.The SWIM indicates ‘Software Wireless Identity Module’.1.Certificates: Displays the list of the root certificates that have beensaved, and allows you to open each of them to view or delete.2 Change Auth. PIN: Changes the PIN code to use the SWIM. Tochange the PIN code, you must input a new code twice together withthe existing value. You need to input at least 4 numbers, while you caninput a maximum of 20 numbers.3 Change SignText PIN: Changes the PIN code of SignText.4 Session Info: Shows the information of the secure session currentlyconnected.