Pantech PG-3210 Service Manual
Also see for PG-3210: User manual
                                                  | |
PG-3210 Service Manual1PANTECHSection 4. Theory of Operation4.1 Logic Section4.1.1 DC Distribution and Regulation PartApplying battery voltage and pressing “END” key on the key pad short-circuits “Ground” and “PowerON”. AD6537B(U102) control that power manage regarding power on/off in handsetPressing POWERKEY on the key pad is active on the handset.This will turn on all the LDOs, when PowerON is held low. The power of RF Tx power amplifier issupplied directly by the battery.4.1.2 Logic part4.1.2.1 SummaryThe logic part consists of AD6527 ARM7 microprocessor-combined DBB(Digital BaseBand)GSM-ASIC, COMBO(flash ROM & SRAM), AD6537B ABB(Analog BaseBand) Chip. AD6527 isGSM-ASIC chipset implemented for GSM terminal’s system control and baseband digital signalprocessing.Major parts used in the logic part are as follows:1) AD6527 : U101, [ARM7 Processor Core + DBB GSM Signal Processing] ASIC2) AD6537B : U102, Analog Baseband Processor (Power management + Voice Codec)3) COMBO MEMORY(Flash ROM : U103, 128Mbit Flash Memory + 32Mbit SRAM )4.1.2.2 Baseband Digital Signal ProcessingAD6527 is a GSM core device containing ARM7 CPU core. AD6527 is 204 pin LFBGA (mini-BGA)package, consisting of terminal chips. The function and characteristics of clock are as follows:1) Complete single chip GSM Processor2) Channel codec sub-system• Channel coder and decoder• Interleaver and Deinterleaver• Encryption and Decryption3) Control Processor Subsystem including• Parallel and serial Display interface• Keypad Interface• SIM Interface• Control of RADIO subsystem• Real Time Clock with Alarm |
Related manuals for Pantech PG-3210
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine