Pantech PG-3500 User Manual
                                                                              | |
Contents
| 
128Receive Mode [1.6.2]Sets up Push Message receiving.- Accept All: Receives all Push messages.- Accept None: Rejects all Push messages.Go to URL [1.7]Allows you to directly input and connect to the desired URL.Profiles [1.8]Selects or edits the Connection Profile supplied by thephone.Select the Profile List and press the [o] key for setup.The Unedited Profile will not be selected.Select the Profile List and press the [Edit] Soft key to edit aprofile.- Profile Name: Pressing the [o] key allows you to enter the editmode to change a profile name.- Home URL: Pressing the [o] key allows you to enter the editmode to edit the Homepage URL provided by the serviceprovider.- Connection Type: Select either WAP or HTTP.- GSM Settings: This menu allows you to set the GSM networkproxy, and has the following sub-menus:- Gateway/Proxy: If you set the Connection Type for WAP,Gateway appears. If you set it for HTTP, Proxy appears.Pressing the [o] key allows you to access the sub-menus suchas IP Address, IP Port, Login ID and Password. For each sub-menu, pressing the [o] button lets you enter edit mode to editevery item provided by the service provider.- Data Call Type: Use the left or right navigation key to selectfrom the two modes: ISDN and Analogue.- Dial Number: Pressing the [o] key allows you to enter the editmode to change this item.- Login ID: Pressing the [o] key allows you to enter the editmode to change this item.- Password: Pressing the [o] key allows you to enter the editmode to change this item.- GPRS Settings: This menu allows you to set the GPRS networkproxy, and it has the following sub-menus:- Gateway/Proxy: If you set the Connection Type for WAP,Gateway appears. If you set it for HTTP, Proxy appears.Pressing the [o] key allows you to access the sub-menus suchas IP Address, IP Port, Login ID and Password. For each sub-menu, pressing the [o] key lets you enter edit mode to editevery item provided by the service provider.- APN: It stands for Access Point Name. Pressing the [o] keylets you enter the edit mode to change this item.- Login ID: Pressing the [o] key lets you enter the edit mode tochange this item.- Password: Pressing the [o] key lets you enter edit mode tochange this item.- DNS Settings: Enter the IP address for the Domain Name Server.You may enter primary and secondary DNS. This function isavailable only when you are connected to HTTP.- Bearer: This lets you select the bearer type for each type ofnetwork access. Using the left or right navigation key allows youto select from the two modes: GSM Only and GPRS Only.- Reset Profile: Pressing the [o] key initializes the parametersettings of a profile. You can select from Yes/No.129WAP WAPNOTE: The parameter settings are already entered as required by theservice provider. Care should be taken when you make any modificationto a profile since it may cause WAP to be inoperative. |
Related manuals for Pantech PG-3500
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine