Pantech Verse User Manual

Also see for Verse: Quick start guide

Contents

Pantech Verse User Manual Manual pdf 18 page image

320103040506070233CALL WAITING FUNCTIONIf you are on a call and you receive another incoming call, you will hear a beep and thecaller’s phone number will appear on the display. With Call Waiting, you may put theactive call on hold while you answer the other incoming call.To answer another call while on the phone, press the SEND Key .This places the first call on hold. To switch back to the first caller, press the SENDKey again.CALLING A NUMBER FROM CONTACTS1. From idle mode, press the END/POWER Key , then press the Key inless than three seconds to unlock the keypad. Press the Right Soft Key[Contacts].2. Select the Contact entry and press the Key [VIEW], then select the desiredphone number.3. Press the SEND Key to place the call.Selecting the Contact entry and then pressing the Send Key will dial the DefaultNumber of the Contact entry automatically.ADJUSTING VOLUMETO ADJUST THE MASTER VOLUME:1. From idle mode, press the END/POWER Key , then press the Key in lessthan three seconds to unlock the keypad. Press the Volume Keys / up ordown (located on the left side of the device).2. Select one of the following options and press the Key [SET] to save it.• All Sounds Off• Alarm Only•Vibrate Only• Low / Medium Low / Medium / Medium High / HighPress the Volume Keys / up or down (located on the left side of the device) to adjustEarpiece volume during a call.CALLER ID FUNCTIONCaller ID displays the number of the person calling when your phone rings. If the caller’sidentity is stored in Contacts, the name appears on the screen. The caller ID is stored inthe Call History menu.VIBRATE MODEVibrate Mode mutes key tones and alerts for an incoming call or message. To activateVibrate Mode:1. Slide the phone up, then press and hold the Vibration Mode Key (#) toactivate vibration mode.2. To deactivate vibration mode, press and hold the Vibration Mode Key (#) .SPEAKERPHONE MODEThe Speakerphone feature lets you hear audio through the speaker and talk withoutholding the phone.To activate, press the END/POWER Key , then press the Key in less thanthree seconds to unlock the keypad. Press the Speakerphone Key .To deactivate, press the Speakerphone Key again.USING AUTO KEYPAD LOCK FUNCTIONWhen the slide is closed the Side Keys and the Directional Key are locked. To unlockthem, press any key on the external display with the phone in the closed position“Keypad Locked (Press END)” displays. “PRESS OK TO UNLOCK KEYPAD” will bedisplayed on the screen, then press the Key to unlock the keypad.