ParaBody 777101 User Manual

Also see for 777101: User guide

Contents

17STEP 20:FIGURE 20• Assemble one V-PULLEY (39) to the LEFT ARM SUPPORT (5) using one 3/8 X 2-3/4” BOLT (55) and one 3/8” LOCK NUT (63).See FIGURE 20. (Note: Loop the ARM CABLE around the PULLEY prior to assembling the LEFT ARM SUPPORT.)• Route the ARM CABLE (31) through the LEFT ARM (7) as shown in FIGURE 20.• Assemble one 4-1/2” PULLEY (38) to the LEFT ARM (7) using one 3/8 X 2-3/4” BOLT (55), two 3/8 X 1/2” SPACERS (50) and one3/8” LOCK NUT (63). See FIGURE 20. (Note: Loop the ARM CABLE around the PULLEY prior to assembling the LEFTARM.)55 3/8 X 2-3/4”633938317 5563/8 X 2-3/4” 55• SECURELY assemble one 2” NYLON SPACER (56) to the LEFT ARM SUPPORT (5) using one 3/8 X 2-3/4” BOLT (55) andone 3/8” LOCK NUT (63). See FIGURE 20.• Assemble the LEFT ARM (7) to the LEFT ARM SUPPORT (5) using one 3/8 X 2-3/4” BOLT (55) and one 3/8” LOCK NUT (63).See FIGURE 20. (Note: Make sure the ARM CABLE runs in FRONT of the bolt as shown!.)50