Paradyne 5011 Installation Instructions Manual

Also see for 5011: Installation instructions

Contents

115020-A2-GN10-20 March 1998In the six-card chassis, each filler panel is attached to the chassis with two1/4-turn fasteners. Remove a filler panel and replace with a POTS splitter card,as needed. Keep filler panels in all unused slots.D S L InterfaceLoop InterfaceP S T N Interface 97-15431C O P O T S S plitterS ix-C ard C hassis1/4-TurnF astener1/4-TurnF astenerFillerPanelCabling OverviewThe interfaces to both the POTS splitter card and the DSLAM use 50-positionamphenol-type connectors. Each DSL line uses one pair of copper wires. EachPOTS splitter card uses 12 pairs of the 25 pairs on each 50-position connector.The 12 pairs for the POTS splitter card can be connected directly to the DSLAMusing a straight-through cable or connected directly to the MDF. In order todirectly connect 24 POTS splitter pairs, use a Y-cable to combine 12 pairs fromtwo POTS splitter cards.The Y-cable part number is 8000-F1-001.