Paradyne 7112 Instructions Manual

Also see for 7112: User guide

Contents

6 7112-A2-GN10-40February 2000Hardware Verification Verify that the OK LED is on. Verify that the FAIL is off.97-15687NetworkSystem PortFT1/T1CTS (106)OKFAILTESTSIGOOFALARMEERTXD (103)RXD (104)RTS (105)DTR (108)7112 SNMP DSU/CSUMONITORIn Out Verify that the User Interface Idle screen is displayed on the ASCII terminal orPC.Press the Enter key. Verify that the Main Menu appears.ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎmain Access Level: 1 PARADYNEDevice Name: Model: 7112MAIN MENUStatusTestConfigurationControl––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Ctrl-a to access these functions ExitNOTES:Your VT100 terminal or emulation software must be set to communicate at arate of 9.6 kbps, using characters of 8 bits, one stop bit, and no parity.Verifying the connection to a LAN, router, or external modem requires setupand configuration; see Chapter 3, Configuring the DSU/CSU, in the User’sGuide.