Paradyne COMSPHERE 6700 Series User Manual

Also see for COMSPHERE 6700 Series: User guide Network configuration guide User guide Release note Network configuration guide

Paradyne COMSPHERE 6700 Series User Manual Manual pdf 18 page image

Traps and Report Formats3-2 6700-A2-GB20-30September 1998Traps OIDsTraps are generated for alert conditions detected by the COMSPHERE 6700Series NMS.The Enterprise OBJECT IDENTIFIER (OID) used in device traps in Trap Mode 1is the following:iso(1) org(3) dod(6) internet(1) private(4) enterprises(1)att-2(74) att-products(1) paradyneNMS-products(13)nms-6700-products(2) att67 devOid(2)For Trap Mode 2, the OBJECT IDENTIFIER (OID) varies depending on thedevice type generating the trap.For dial devices, the following OID is used:iso(1) org(3) dod(6) internet(1) private(4) enterprises(1)att-2(74) att-products(1) paradyneNMS-products(13)nms-6700-products(2) att67 devOid(2) att67dialOid(1)For APL devices, the following OID is used:iso(1) org(3) dod(6) internet(1) private(4) enterprises(1)att-2(74) att-products(1) paradyneNMS-products(13)nms-6700-products(2) att67 devOid(2) att67aplOid(2)For DSU devices, the following OID is used:iso(1) org(3) dod(6) internet(1) private(4) enterprises(1)att-2(74) att-products(1) paradyneNMS-products(13)nms-6700-products(2) att67 devOid(2) att67dsuOid(3)For the NMS system, the following OID is used:iso(1) org(3) dod(6) internet(1) private(4) enterprises(1)att-2(74) att-products(1) paradyneNMS-products(13)nms-6700-products(2) att67nmsOid(1)The community name used in device product traps is the Device ReadCommunity. This is formed by concatenating base read community with thedevice name.Mode 1 TrapsThe following COMSPHERE 6700 Device MIB variable bindings are included ineach trap message. Device Name (devAdminName) Device Type (devAdminModelType) System Time (nmsSystemTime)