Paradyne COMSPHERE 6700 Series User Manual

Also see for COMSPHERE 6700 Series: User guide Network configuration guide User guide User guide Release note

Contents

Paradyne COMSPHERE
6700 Series User Manual Manual pdf 29 page image

Management Information Bases3-7Issue 1 September 1994SNMP Traps OverviewCOMSPHERE 6700 NMS alerts may be exported to authorizedSNMP managers as SNMP traps. Traps are forwarded for anyevent that makes it through the COMSPHERE 6700 SeriesNMS’s alert filter.All traps are enterprise specific, with an OBJECT IDENTIFIERspecifying the COMSPHERE 6700 Enterprise Device product.Trap forwarding can be turned on/off for each SNMP manager inthe authorized manager list through the COMSPHERE 6700Series NMS Network Configuration feature or via SNMP. To doso, refer to theCOMSPHERE 6700 Series NetworkManagement System Network Configuration Guide.Refer to Appendix C for a full description of the COMSPHERE6700 Enterprise Traps.Device TrapsDevice traps are generated for device-related alert conditionsdetected by the COMSPHERE 6700 Series NMS.The Enterprise OBJECT IDENTIFIER used in device traps is thefollowing:iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) att-2(74) att-products(1)paradyneNMS-products(13) nms6700-products(2) devOid(2)The community name used in device product traps is the DeviceRead Community. This is formed by concatenating base readcommunity with the device name.The following COMSPHERE 6700 Device MIB variable bindingsare included in each trap message. Device Name (devAdminName) Device Type (devAdminModelType) System Time (nmsSystemTime)Table 3-2 identifies which primary alert traps apply to the specificdevices. Trap numbers 1–32 are reserved for primary alerts.