Paradyne FrameSaver SLV 9x24 Series Installation Instructions Manual
Also see for FrameSaver SLV 9124: Installation instructionsTechnical referenceInstallation instructionsUser guide
                            | |
24Important Safety Instructions1. Read and follow all warning notices and instructions marked on the product orincluded in the manual.2. All installation must be performed by qualified service personnel, as opening orremoving covers may expose dangerous high voltage points or other risks.3. The power supply for this product is intended to be used with a 3-wire groundingtype plug – a plug which has a grounding pin. This is a safety feature. Equipmentgrounding is vital to ensure safe operation. Do not defeat the purpose of thegrounding type plug by modifying the plug or using an adapter.4. Prior to installation, use an outlet tester or a voltmeter to check the ac receptaclefor the presence of earth ground. If the receptacle is not properly grounded, theinstallation must not continue until a qualified electrician has corrected theproblem.If a 3-wire grounding type power source is not available, consult a qualifiedelectrician to determine another method of grounding the equipment.5. Slots and openings in the cabinet are provided for ventilation. To ensure reliableoperation of the product and to protect it from overheating, these slots andopenings must not be blocked or covered.6. Do not allow anything to rest on the power cord and do not locate the productwhere persons will walk on the power cord.7. General purpose cables are provided with this product. Special cables, which maybe required by the regulatory inspection authority for the installation site, are theresponsibility of the customer.8. When installed in the final configuration, the product must comply with theapplicable Safety Standards and regulatory requirements of the country in which itis installed. If necessary, consult with the appropriate regulatory agencies andinspection authorities to ensure compliance.9. A rare phenomenon can create a voltage potential between the earth grounds oftwo or more buildings. If products installed in separate buildings areinterconnected, the voltage potential may cause a hazardous condition. Consult aqualified electrical consultant to determine whether or not this phenomenon existsand, if necessary, implement corrective action prior to interconnecting the products.In addition, if the equipment is to be used with telecommunications circuits, takethe following precautions:10. Never install telephone wiring during a lightning storm.11. Never install telephone jacks in wet locations unless the jack is specificallydesigned for wet locations.12. Never touch uninsulated telephone wires or terminals unless the telephone linehas been disconnected at the network interface.13. Use caution when installing or modifying telephone lines. |
Related manuals for Paradyne FrameSaver SLV 9124
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine