Paradyne FrameSaver SLV Series Installation Instructions Manual
Also see for FrameSaver SLV 9124: Installation instructionsTechnical referenceInstallation instructionsUser guide
                                       | |
34EMI Warnings! WARNING:This equipment has been tested and found to comply with the limits for aClass A digital device, pursuant to Part 15 of the FCC rules. These limits aredesigned to provide reasonable protection against harmful interferencewhen the equipment is operated in a commercial environment. Thisequipment generates, uses, and can radiate radio frequency energy and, ifnot installed and used in accordance with the instruction manual, may causeharmful interference to radio communications. Operation of this equipmentin a residential area is likely to cause harmful interference, in which case, theuser will be required to correct the interference at his own expense.The authority to operate this equipment is conditioned by the requirementsthat no modifications will be made to the equipment unless the changes ormodifications are expressly approved by Paradyne.In order to maintain compliance with FCC limits, any supplied ferrite chokesmust be installed in accordance with the card installation instructions.! WARNING:To Users of Digital Apparatus in Canada:This Class A digital apparatus meets all requirements of the Canadianinterference-causing equipment regulations.Cet appareil numérique de la classe A respecte toutes les exigences durèglement sur le matériel brouilleur du Canada.Important Safety Instructions1. Read and follow all warning notices and instructions marked on the product orincluded in the manual.2. This product is intended to be used with a 3-wire grounding type plug – a plugwhich has a grounding pin. This is a safety feature. Equipment grounding is vital toensure safe operation. Do not defeat the purpose of the grounding type plug bymodifying the plug or using an adapter.Prior to installation, use an outlet tester or a voltmeter to check the ac receptaclefor the presence of earth ground. If the receptacle is not properly grounded, theinstallation must not continue until a qualified electrician has corrected theproblem.If a 3-wire grounding type power source is not available, consult a qualifiedelectrician to determine another method of grounding the equipment. |
Related manuals for Paradyne FrameSaver SLV 9124
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine