Paradyne Hotwire 6341 Installation Instructions Manual

Also see for Hotwire 6341: User guide User guide Installation instructions

Contents

98-16055a8-PinPlugEthernetCablePin #1Pin #815 The Ethernet interface connector uses an 8-pin, non-keyed modular plug.Use shielded twisted-pair CAT5 or better cables.— To connect to 6341 SDSL router to an Ethernet hub or a 6342 SDSL router toa PC with an Ethernet NIC card installed, use the straight-through connection.8-Pin Straight-Through ConnectionPin # Function1 10/100BaseT TX D+2 10/100BaseT TX D–3 10/100BaseT RX D+4 & 5 Not used6 10/100BaseT RX D–7 & 8 Not used— To connect a 6341 SDSL router to a PC with an Ethernet NIC card installed ora 6342 SDSL router to an external hub, use an Ethernet crossover cable.10/100BaseT TX D+10/100BaseT TX D–10/100BaseT RX D+Not UsedNot Used10/100BaseT RX D–Not UsedNot Used123456781234567810/100BaseT TX D+10/100BaseT TX D–10/100BaseT RX D+Not UsedNot Used10/100BaseT RX D–Not UsedNot UsedFunction Pin # FunctionPin #8-Pin Ethernet Crossover Cable99-16518Pin #1/2 = Orange/WhiteTwisted Pair Pin #3/6 = Blue/WhiteTwisted Pair