Paradyne Hotwire 7995 Installation Instructions Manual

Also see for Hotwire 7995: Quick installation instructions User guide User guide User guide

Contents

Paradyne Hotwire 7995 Installation Instructions Manual Manual pdf 6 page image

6Connecting to a System TerminalAn optional system maintenance terminal may be attached to your Hotwire 799xendpoint through the modular jack on the rear panel. The system maintenance terminalallows you to view the status of the unit and change configuration options. The terminalmust be a VT100-compatible terminal or a PC running terminal emulation software.ProcedureTo connect your unit to a system terminal:1. Connect the 9-pin end of the supplied terminal cable into a COM port on your PC.2. Plug the other end into the modular jack on the rear panel.3. Set the communication parameters on your PC or terminal to:— 9600 baud— 8 bit characters— no parity— 1 stop bit— no flow control4. Press Enter from your terminal or PC to activate the Main Menu for the attachedunit.The system runs diagnostics and status checks. After a few moments, the MainMenu or Logon screen appears on your terminal.main Access Level: AdministratorModel 799xMAIN MENUStatusTestConfigurationControl-----------------------------------------------------------------------------Ctrl-a to access these functions ExitSystem Operational