Paradyne Hotwire 8335 Installation Instructions Manual

Also see for Hotwire 8335: User guide User guide

Contents

Paradyne Hotwire 8335 Installation Instructions Manual Manual pdf 9 page image

8335-A2-GZ40-60 March 2005 9Logging In to the MCC CardYou can log in to the management card using either a local VT100- compatibleterminal or a remote Telnet connection.After you enter your user ID and password, the system displays the Main Menu.See the Hotwire Management Communications Controller (MCC) Card,IP Conservative, User’s Guide for information about selecting the unit from thecard selection screen.Entering Card InformationAfter accessing your line card for the first time, use the Card Information screen toconfigure basic information about the card. To access the Card Informationscreen, follow this menu selection sequence:Configuration→ Card→ Card Info (A-A-A)Configuring the DSL PortsYou can set the rate of the DSL ports from the DSL Port Configuration screen. Toaccess the DSL Port Configuration screen, follow this menu selection sequence:Configuration→ Physical Ports→ DSL Ports (A-B-B)Configuring the ATM ParametersYou can configure ATM parameters from the ATM Parameters screen. To accessthe ATM Parameters screen, follow this menu selection sequence:Configuration→ ATM Switch→ ATM Parameters (A-E-A)Configuring ATM Cross ConnectionYou can configure VC connections from the line card to the endpoint with the ATMCross Connect screen. To access the ATM Cross Connect screen, follow thismenu selection sequence:Configuration→ ATM Switch→ ATM Cross Connect (A-E-B)

/ 12

Related manuals for Paradyne Hotwire 8335